1.
The Research of Auto Adjustor System of Coaxiality and Automatic Control System of Heat Treatment for Producing Drilling Pipes;
钻杆对焊自动找正及焊区热处理监控系统研究
2.
Hydrogen Embrittlement for the Welded Joint of TA16 Alloy and TA19 Alloy;
TA16合金和TA19合金焊区的氢脆
3.
Study and Analysis of Mechanical Properties and Microstructures of Dissimilar Metals Laser-welded Joints in Prosthdontics;
口腔修复异种金属激光焊接焊区力学性能及组织结构分析研究
4.
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
5.
Numerical Simulation of the Effects of Welding Processes on Temperature Field of GMAW Surfacing Weld Zone
焊接工艺对GMAW堆焊焊缝区温度场影响的数值模拟
6.
Simulation of the microstructure evolution of welding-grain growth in heat affected zone
焊接过程组织演变——模拟焊接热影响区晶粒长大
7.
Pacific Ocean Coalition of Welding Associations(POCWA)
太平洋地区焊接学会联合会
8.
Illumination of PLC panel and weld area and operation desk.
PLC柜,焊缝区及操作台的照明
9.
Softening of Heat Affected Zone (HAZ) of 2090Al -Li Alloy during Welding
2090铝锂合金焊接热影响区软化机理
10.
Monte Carlo Simulation of Grain Growth in the Heat-Affected-Zone of Laser Welding;
激光焊接热影响区晶粒长大Monte Carlo模拟
11.
The Study on Computer Control System of Multitemperatual Zones Refolw Soldering;
多温区回流焊计算机控制系统的研究
12.
Research on the Performance Simulation of HAZ of 07MnNiCrMoVDR Steel;
07MnNiCrMoVDR钢焊接热影响区性能的模拟研究
13.
Connection of Grain Size in Welding Heat Affected Zone and Welding Process of SUPER304H Steel
SUPER304H焊接工艺与热影响区晶粒度的关系
14.
Local mechanical property testing system of welded joint using instrument ball indentation technique
焊接接头微区力学性能压痕测试系统
15.
Electrochemical behavior of various micro-areas on the welded joint of Q235 steel
Q235管线钢焊接接头微区电化学行为
16.
Fracture toughness of heat-affected zone( HAZ) was between the base metal and weld metal.
焊接热影响区的断裂韧性介于母材和焊缝金属之间。
17.
The welding methods, heat-affected zone, and design method of weld strength are introduced.
文中介绍铝合金的焊接方法、接热影响区以及焊接强度的设计方法。
18.
If too much solder is use, it may flow past tube and clog seating area.
如果采用太多的焊料，则焊料可能流过管道并阻塞密封区域。