1.
double-screw bolt
螺柱，双头螺纹螺栓
2.
bm=1.25d Double end studs bm=1.25d
GB/T898-1988双头螺柱
3.
bm=1.5d Double end studs bm=1.5d
GB/T899-1988双头螺柱
4.
bm=1d Double end studs--bm=1d
GB/T897-1988双头螺柱
5.
bm=2d Double end studs bm=2d
GB/T900-1988双头螺柱
6.
Connections with waisted stud--Studs
GB/T13807.2-1992腰状杆螺柱连接副螺柱
7.
Studs--Technical requirements
GB/T1168-1976螺柱技术条件
8.
Research on Stud Welding and Middle-thickness Board with Compound Heat Source;
螺柱与中厚高强钢复合热源螺柱焊试验研究
9.
" Bolts, screws and studs--Nominal lengths, and thread lengths for general purpose bolts"
GB/T3106-1982螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度
10.
" Mechanical properties of fasteners--Bolts, screws and studs"
GB/T3098.1-1982紧固件机械性能螺栓、螺钉和螺柱
11.
" Fasteners--General requirements for blots,screws,studs and nuts"
GB/T16938-1997紧固件螺栓、螺钉、螺柱和螺母通用技术条件
12.
" Fasteners--Bolts,screws,studs and nuts--Symbols and designations of dimensions"
GB/T5276-1985紧固件螺栓、螺钉、螺柱及螺母尺寸代号和标注
13.
" Mechanical properties of fasteners--Stainless steel bolts,screws, studs and nuts"
"GB/T3098.6-1986紧固件机械性能不锈钢螺栓,螺钉,螺柱和螺母"
14.
" Mechanical properties of fasteners--Bolts, screws, studs and nuts made of non-ferrous metals"
GB/T3098.10-1993紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母
15.
follower stud and unt
从动板柱螺栓及螺母
16.
Parallel pins with internal thread
GB/T120-1986内螺纹圆柱销
17.
Slotted cheese head screws
GB/T65-1985开槽圆柱头螺钉
18.
equal spiral angle taper cylindrical milling cutter
等螺旋角锥度柱铣刀