1.
Determination of minimum film-forming temperature of emulsion for latex paints
GB/T9267-1988乳胶漆用乳液最低成膜温度的测定
2.
Influence of Polymerization Technology and Monomer Ratio on the Minimum Film Forming Temperature of Vinyl Ace-tate/Styrene/Acrylic Emulsion/
聚合工艺和单体配比对醋苯丙乳液最低成膜温度的影响
3.
Effect of the sintering temperatures on the structure and performance of synthesizing mullite membrane
烧成温度对合成莫来石陶瓷膜的影响
4.
Film Strength Ability of a film of lubricants to resist rupture due to load． Speed and temperature.
油膜强度润滑油油膜抵抗因负荷、度和温度而造成破裂的能力。
5.
Film Strength Ability of a film of lubricants to resist rupture due to load．Speed and temperature.
油膜强度润滑油油膜抵抗因负荷、速度和温度而造成破裂的能力。
6.
low-temperature thin film NiCr thermometer
低温镍铬薄膜温度计
7.
Study of the Lubricant Film Formation Characteristic and Temperature Distribution in Nanogap under High Pressure;
高压微间隙润滑成膜特性及温度场分布的研究
8.
The temperature dependence of epitaxial BiFeO_3 thin films
外延BiFeO_3薄膜的温度特性
9.
Plastic mulch increases soil temperature in the bed which promotes faster crop development and earlier yields.
塑料薄膜覆盖提高苗床的土壤温度，促进作物较快发育并提早成熟。
10.
Study on Numerical Simulation of 3D Temperature Field during Selective Laser Sintering Polymer-coated Metal Powder;
覆膜金属粉末激光烧结成型过程三维温度场数值模拟技术研究
11.
The influence of the Water-resisting Property on the Tg of the Styrene-acrylic Acids Copolymer Emulsion to its Coating Film;
苯-丙乳液的玻璃化温度对其成膜耐水性能的影响
12.
Synthesis and Characterization of Thermo-sensitive Polymer and Its Applications in Functional Membranes
温度敏感性高分子材料的合成以及在智能膜材料中的应用
13.
This paper has discussed,from the views of biochemistry,the factors influencing the film-forming process of Chinese lacquer,such as temperature,humidity and water content.
从生物化学角度探讨了影响生漆成膜过程的温度、湿度、含水量等因素。
14.
The oil must have a sufficiently high viscosity at high operating temperatures to ensure the formation of a continuous film of oil between the bearing and shaft.
润滑油在较高的工作温度下必须具有足够高的粘度，以确保轴承和轴之间形成连续的油膜.
15.
Establishing a Temperature Monitoring System Using DS1620 Temperature Sensor
利用DS1620温度传感器构成温度监控系统
16.
Effect of Dissolving Temperature of Dopes on the Morphology of PVDF Membrane
铸膜液溶解温度对制备PVDF微孔膜结构的影响
17.
Optical Fiber Temperature Sensor Based on Temperature-dependent Optical Properties of ZnO Film on the Sapphire Fiber-ending
利用ZnO薄膜温变特性构建光纤温度传感器
18.
The Switch Temperature of Thermal Sensitive Polyurethane and Its Maniplulation
温敏聚氨酯膜开关温度阀值及其调控途径