1.
Research on the Springback of Bending in LY12 Aluminum Alloy Sheet;
LY12铝合金板材弯曲回弹实验研究
2.
Study of Springback for Design of the Tool in Big Sheet Metal Forming;
大型板材弯曲模具设计中补偿弯曲回弹变形的研究
3.
Bending Deformation and Stress of Skew Metal Sheets;
金属斜板材弯曲变形与应力关系的研究
4.
Research on the Law of Springback in Bend-Forming with Titanium Alloy Sheet
TA2M钛合金板材弯曲成形回弹规律的研究
5.
Some Thinking on Improving Bending Test Accuracy of Metal Plank Material
提高金属板材弯曲试验准确性几点思考
6.
Study on Laser Bending for Metal Sheets and Mechanism;
金属板材激光弯曲成形及其机理研究
7.
Research on Springback in Bend-forming U-shaped Parts of TA2M Titanium Alloy Sheets
TA2M钛合金板材U形件弯曲回弹研究
8.
Bending, Buckling and Vibration Analysis of FGM Thick Plates;
功能梯度材料厚板的弯曲、屈曲及振动分析
9.
LONGITUDINAL BUCKLE OF ASYMMETRIC CLADED STAINLESS STEEL PLATES FOR HOT ROLLING
非对称不锈钢热轧复合板材的纵向弯曲
10.
Study on LVL Bending Creep Properties and Its Failure Mechanisms;
单板层积材弯曲蠕变特性及破坏机理的研究
11.
Research on Intelligent Control Technologies for V Shaped Free Bending of Sheet Metal;
板材V型自由弯曲智能化控制技术的研究
12.
Laser Forming of Sheet Metal and Its Application;
金属板材的激光弯曲成形技术及其应用
13.
Die-surface design method compensating springback of varied curvature bending for sheet metal
板材非圆弧弯曲回弹补偿模具型面设计方法
14.
Finite Element Mechanics Models of Combined Bending and Forming TC4 Sheet
组合弯曲成型TC4板材的有限元力学模型
15.
Across the ceiling meandered a long crack
天花板上有一长条弯弯曲曲的裂缝。
16.
My cricket bat has sprung.
我的板球拍弯曲了。
17.
He flattened out the bent plate.
他把弯曲的金属板弄平。
18.
Metallic materials-Reverse bend test(Sheet and strip 3mm thick or less)
GB/T235-1988金属反复弯曲试验方法(厚度等于或小于3mm薄板及带材)