1.
Paints and varnishes--Surface-drying test--Ballotini method

GB/T6753.2-1986涂料表面干燥试验小玻璃球法
2.
Effects of Atmospheric Pressure on Dry-band Discharge of Silicone Rubber Insulator;

硅橡胶绝缘子表面干燥带放电与气压影响的研究
3.
a fungus convex cap and a dingy yellow under surface and a dry stalk.

帽子凸起,表面以下暗黄色,有着干燥茎干的菌类。
4.
Dried flux is liable to flake off, exposing metal surfaces to oxidation.

干燥的焊剂会脱落,是暴露的金属表面被氧化。
5.
A coupled model of penetration and evaporation for ink film drying on plain paper

纸张表面墨膜蒸发与渗透干燥的耦合建模
6.
the floor was dry and level, and had a sort of small lose gravel upon it, so that there was no nauseous creature to be seen, neither was there any damp, or wet, on the sides or roof:
地上干燥平坦,表面是一层细碎的沙石,所以不会有令人厌恶的毒蛇爬虫。洞顶和四壁也十分干燥。
7.
drier ,face, electric domestic

家用电动面部干燥器
8.
There has been a lack of rain and the ground is very dry.

缺少雨水,地面非常干燥。
9.
The surface must be free from oil, grease and dirt, and be dry prior to painting.

施工表面必须除净油污和杂质,并在施工前务必保持干燥。
10.
The surface must be free from oil, grease and dirt, and be dry prior to application.

施工表面必须除去油污和杂技,在施工前务必保持干燥。
11.
Soils start to dry from the surface but subsoils may remain wet so that rice roots can absorb available water.
土壤由表面开始干燥,但底土潮湿,因此,水稻能吸到有效水。
12.
When two dry surfaces are placed against each other they may lock together.

两块干燥物体的表面相对放在一起,它们就可能卡
13.
Re-dissolve in thinner: When an acrylic lacquer is sprayed onto a surface it dries by evaporation of the thinner.
在稀释剂中再溶解:喷到表面的丙烯酸漆通过稀释剂的蒸发来干燥。
14.
Effects of drying on surface area and phase composition of VPO Catalysts;

超临界流体干燥对VPO催化剂比表面和晶相的影响
15.
Agglomeration mechanism of surfactant of ultra-fine Al(OH)_3 in drying process

超细氢氧化铝粉体干燥过程中表面活性剂的作用机理
16.
after the hot dry summer, the soil is cracking up

炎热干燥的夏季过后,地面干裂了。
17.
There are great differences of section, surface and underside structure between the samples of vacuum belt drying and freeze-drying.
真空冷冻及真空带式干燥产品的截面、表面和底面孔洞结构都有较大区别。
18.
Using Method: According to the thickness of the fibre to be hardened, spray the solidifying agent on the surface of solidified fibre and it can be directly use after natural dryness or drying.
使用方法:根据要硬化的纤维厚度,将固化剂喷刷在固化的纤维表面自然干燥或烘干即可。