1.
Furnace Brazing of Silver Bearing Watts to Alloy Cr-Zr-Cu at Conductive Loop in Automatic Projection Welding Machine
自动凸焊机导电回路中银瓦与铬-锆-铜合金的炉中钎焊
2.
In this paper, a electrical system based on logic chart reliability theory is introduced, which is designed for projection welding machine and is used to weld the mounting panel of refrigerating compressor.
介绍一种基于单调系统逻辑图可靠性分析理论的制冷压缩机安装板专用凸焊机的电气系统。
3.
motor-operated cam type flash welder
电动凸轮式闪光焊机
4.
Chimes shall be mechanically seamed or welded.
桶的凸边必须用机械方法接合，或焊接。
5.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
6.
The supercharger disk is designed to be boss structure with a welding technical boss on the root of the corresponding blade;
对压气机整体叶盘设计采用盘上凸台式结构，相应的叶片根部预留焊接工艺台；
7.
To achieve the required bump heights, the solder paste is over-printed onto the wafer bond pads.
为了获得要求的凸起高度，锡膏在晶片焊盘过焊。
8.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 1.6MPa (16 bar)
GB/T9116.5-1988PN1.6MPa(16bar)凸面带颈平焊钢制管法兰
9.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 10.0MPa (100 bar)
GB/T9116.10-1988PN10.0MPa(100bar)凸面带颈平焊钢制管法兰
10.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 2.0MPa (20 bar)
GB/T9116.8-1988PN2.0MPa(20bar)凸面带颈平焊钢制管法兰
11.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 2.5MPa (25 bar)
GB/T9116.6-1988PN2.5MPa(25bar)凸面带颈平焊钢制管法兰
12.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 1.0MPa (10 bar)
GB/T9116.4-1988PN1.0MPa(10bar)凸面带颈平焊钢制管法兰
13.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 5.0MPa (50 bar)
GB/T9116.9-1988PN5.0MPa(50bar)凸面带颈平焊钢制管法兰
14.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 4.0MPa (40 bar)
GB/T9116.7-1988PN4.0MPa(40bar)凸面带颈平焊钢制管法兰
15.
Steel pipe welding neck flanges with male and female face for PN 10.0MPa (100 bar)
GB/T9115.21-1988PN10.0MPa(100bar)凹凸面对焊钢制管法兰
16.
Steel pipe welding neck flanges with male and female face for PN 15.0MPa (150 bar)
GB/T9115.22-1988PN15.0MPa(150bar)凹凸面对焊钢制管法兰
17.
Steel pipe welding neck flanges with male and female face for PN 2.5MPa (25 bar)
GB/T9115.18-1988PN2.5MPa(25bar)凹凸面对焊钢制管法兰
18.
Steel pipe welding neck flanges with male and female face for PN 4.0MPa (40 bar)
GB/T9115.19-1988PN4.0MPa(40bar)凹凸面对焊钢制管法兰