1.
Standard method of torsion test for resin cast
GB/T4726-1984树脂浇铸体扭转试验方法
2.
Test method for flexural properties of resin casting body
GB/T2570-1995树脂浇铸体弯曲性能试验方法
3.
Test method for compressive properties of resin casting body
GB/T2569-1995树脂浇铸体压缩性能试验方法
4.
Test method for tensile properties of resin casting body
GB/T2568-1995树脂浇铸体拉伸性能试验方法
5.
The generals of test methods for properties of resin casting body
GB/T2567-1995树脂浇铸体性能试验方法总则
6.
Test method for impact resistance of resin casting body
GB/T2571-1995树脂浇铸体冲击试验方法
7.
Unsaturated polyester resin--Determination of stability of casting resin in basic solution
GB/T7194-1987不饱和聚酯树脂浇铸体耐碱性测定方法
8.
Relation of the Property of a Low Viscosity Epoxy Resin Casting Matrix to Its Degree of Cure
低粘度环氧树脂浇铸体性能与固化度的关系
9.
Unsaturated polyester resin--Determination of refractive index of liquid and casting
GB/T8238-1987不饱和聚酯树脂液体和浇铸体折光率的测定
10.
The cured resin had good mechanical properties and moisture resistance.
在促进剂作用下，可以在125℃右固化环氧树脂，固化后的浇铸体有良好的力学性能和耐湿热性。
11.
Study on effect of organic silicon resin on capability of epoxy resin cast
有机硅树脂对环氧树脂浇注体性能的影响
12.
New Type of Aliphatic Diisocyanate and Its Cast Elastomers
新型脂肪族二异氰酸酯及其浇铸弹性体
13.
Study on toughening of epoxy adhesives cured at room temperature for preparation of membrane module
膜组件浇铸用室温固化环氧树脂胶粘剂的增韧研究
14.
Study of heat-resistant epoxy adhesives cured at room temperature for the preparation of membrane modules
膜组件浇铸用室温固化环氧树脂耐热胶粘剂的研究
15.
The sand faced-iron mould casting process is a special iron castings production process, according which castings are to he cast in the iron moulds having a thin layer of the resin sand facing in their inner surfaces.
铁型覆砂铸造是指在金属型（铁型）内腔覆上一薄层树脂砂，然后采用这种覆砂铁型浇注铸件。
16.
Practice and Research of Box Section Shape and Thin Wall Steel Castings with Furan Resin Sand;
呋喃树脂砂生产薄壁箱体铸钢件的实践与研究
17.
The appliance of developing epoxy colophony to the casting of the viscera of human body;
改良环氧树脂在人体脏器铸型中的应用
18.
Cast Process of Winding in Epoxy Resin Cast Dry-Type Transformer
环氧树脂浇注干式变压器的绕组浇注工艺