1.
cargo loading manifold
货油装卸系统分路阀箱
2.
Three links a triage valves entrance, the two exports, a medium through valves will be divided into two after the road.
三通分流阀有一个入口，两个出口，将一种介质经过阀后分成两路。
3.
The Analysis of Invalidation and Structure for the Flat Gate Valve Using in Dense Medium System Pipe Line;
重介质管路中平板闸阀的失效分析与结构分析
4.
Orthogonal Design and Analyses of Hydraulic Bridge for Water Servo Valve
水压伺服阀液压桥路的正交设计与分析
5.
Research on Multi-way Directional Valve with High-speed On-off Valve as Its Pilot Valve
以高速开关阀为导阀的多路换向阀的研究
6.
Based on the analysis about sea chest design and application on high speed ship, a new type of sea chest is proposecl in this paper.
通过对高速船海水阀箱设计和应用的分析，提出了一种新型海水阀箱的设计思路。
7.
Analysis and Improvement on the Tripping Caused by Short-circuit of DEH High-pressure Magnetic Valve
DEH高压遮断电磁阀短路造成机组跳闸的原因分析及改进
8.
Reliability Analysis and Optimal Design of Main Circuit Within HVDC Thyristor Valve
直流输电换流阀主电路的可靠性分析与优化设计
9.
Intermittent open or shorted valve solenoid
阀电磁间歇断开或短路
10.
REPAIRING TRACTION CONTROL VALVE CIRCUITS
修理牵引控制阀电路。
11.
Connect vacuum line to EGR valve.
将真空管路连接到EGR阀。
12.
Streams are switched by solenoid valves.
流路靠电磁阀进行切换。
13.
Pressure governor valve is composed by governing valve, oil, water separation devices and a combination of one-way valves, etc.
调压阀是由调压阀、油水分离器及单向阀等构成的一个组合阀总成。
14.
The end flaps of the elastomeric seat should be flexed downward toward the valve I.D. as the body halves are being separated.
当阀体分开时，弹性阀体阀座的边缘应该朝向阀门内径弯曲。
15.
Positive mechanical thrust drives plug into body seats to ensure tight bi-directional line seal.
积极的机械推力驱动阀塞进入阀体阀座馁，确保紧密双向管路密封。
16.
Insert stem/ball into stem boss from inside body with ball rotated to align port with waterway.
将球体旋转对准水路端口，从阀体内将阀杆/球体插入阀杆轮箍内。
17.
Study on Water Hydraulic Throttle Valve and Anti-cavitation Characteristics of Orifices;
纯水液压节流阀及阀口气蚀分离研究
18.
Dynamic Analysis of a Spindle of Pilot-operated Solenoid Valve
两级先导式电磁阀主阀芯动力学分析