1.
The rock formed by the cooling and solidifying of molten rock.
熔岩融化的岩石冷却凝固后形成的岩石
2.
Study on Process of Secondary Cooling Solidification of CSP Thin Continual Casting Slab;
CSP薄板连铸坯二次冷却凝固过程的研究
3.
Effect of Cooling Rate on the Microstructure in Steel Deoxidized by Ti
冷却速度对Ti脱氧钢凝固组织的影响
4.
Effects of Cooling Rate on Solidification Structure of Zn-3.5Mg Alloy
冷却速率对Zn-3.5Mg合金凝固组织的影响
5.
condenser air cooling
(空气冷却) 冷凝管
6.
Study on the Influences of Cooling Rate on Solidification Microstrcture of Magnesium-Aluminum System Alloys;
冷却速度对镁—铝系合金凝固组织影响的研究
7.
Researches on Effects of Vibrating the Chilling Path on the Solidifying Microstructure of Alloy;
振动冷却通道对合金凝固组织的影响研究
8.
Application of Liquid Metal Cooling in Directional Solidification of Nickel-Based Super Alloys
液态金属冷却法在高温合金定向凝固中的应用
9.
Effect of cooling rate on solidification structure in high temperature brittle zone of 1Cr18Ni9Ti steel
冷却速率对1Cr18Ni9Ti钢高温脆性区凝固组织的影响
10.
Revamping on Cooling Water System of S+F-Electromagnetic Stirring for Horizontal Concasting
水平连铸二冷区和凝固末端电磁搅拌冷却水系统改造
11.
condenser steam, air-cooled
蒸汽、空气冷却冷凝器
12.
Restricted refrigerant flow through the condenser.
冷却剂流经冷凝器不畅。
13.
Chill rolls: Cooling rollers located after a drying oven, to cool the heated ink film causing it to set.
冷却辘:安装在干燥炉之后的一些降温辘，它使受热后的油墨冷却而凝固。
14.
Multi-cycle Numerical Analysis on the Local Cooling Capacity of Mould during Casting Solidification Process;
铸造凝固过程中模具局部冷却能力的多循环数值分析
15.
Modeling and Characterization of the Solidification of Mono-Sized Sn-5wt.%Pb Droplets Produced by the Uniform Droplet Spray Process;
对均匀颗粒快速凝固过程的研究及其冷却行为的预测
16.
Rapid Solidification and Cooling Behavior Prediction of Sn-Pb Alloy Droplet Produced by Uniform Droplet Spray;
均匀颗粒成型法中Sn-Pb合金的快速凝固及其冷却行为预测
17.
Liver Coagulation by Using a New Type of Internally Water Cooled Microwave Electrode;
水循环冷却式微波天线对肝组织凝固效果的实验研究
18.
Effect of Mold Cooling Intensity on Solidification Structure of Pure Al Refinement Under Electric Current Pulse
铸型冷却强度对脉冲电流细化纯铝凝固组织的影响