1.
Designing of Many Pair Oblique Plane Die of Hermetically Sealed Window and calculating of parameter;
密封窗多对斜楔模结构设计及参数的确定
2.
positive-return cam action forming die
斜楔作用确定回程成形模
3.
The Manufacturing of Roll CAMs in the Stamping Die of Auto Cover
汽车外板模具中旋转斜楔机构的加工制造
4.
DESIGN INJECTION MOULD WITH QUADRATIC EJECTING MECHANISM OF SLIDER AND WEDGE DUAL PUSH PLATE
滑块斜楔双推板式二次推出机构注塑模的设计
5.
Effect of die convex edge's slope raise on teeth's shape of worn shafts formed by cross wedge rolling
模具凸棱升高斜率对楔横轧蜗杆轴齿形的影响
6.
AN ANALYSIS OF THE WEDGE MECHANISMS AND THE DESIGN OF A WEDGE MECHANISM WITH DUPLEX WEDGE ANGLES
斜楔机构的分析及双楔角斜楔机构的设计
7.
Injection mould with ball screw stripping and ball bearing and ta-pered wedge fixed-distance pull off mechanism
带滚珠丝杠脱模及滚珠斜楔拉模定距装置的注射模
8.
Study on the oblique wedge-like transformer with a large dimension rectangular gradual section
大尺寸矩形变截面斜楔型变幅杆研究
9.
sidepiercing cam actuated die
侧楔作用侧向冲孔模
10.
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.
斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目的。
11.
The Study of Making Slanting Wedge in Freight Train with ADI
用贝氏体球墨铸铁制作铁路货车斜楔铁的研究
12.
Design Analysis and Maintenance for Wedge Albany Grease Lubrication System of Rolling Mill
轧机斜楔干油润滑系统设计分析与维护
13.
Numerical investigation for the short isolator with a ramp under asymmetric incoming flow
非对称来流下带斜楔的短隔离段数值研究
14.
Experimental investigation of short isolator with a full ramp under asymmetric incoming flow
带等宽度平直斜楔的非对称来流短隔离段实验
15.
Effect of tooth top slope on forming quality of helix tooth shafts rolled in cross wedge rolling
齿顶斜率对楔横轧螺旋齿形件成形质量的影响
16.
Contract stress analysis of sprag overrunning clutch and life prediction
斜撑式超越离合器楔块的曲线拟合及寿命预测
17.
Structure of Rolling Line Adjusting Device with Large Adjustment
大调节量斜楔式轧制线调整装置结构探讨
18.
To draw the spring-leaf retainer can use the similar method with the wedge which has a smaller obliquity.
对于弹簧的支撑圈,方法类似,只是楔形体的斜面倾斜角度要小一些。