1.
Recovering the Geometry of Single Axis Motions by Conic Fitting;
基于二次曲线的单轴旋转运动分析和三维重建
2.
external phasing gears
(单纯旋转发动机的) 外轴式相位机构
3.
Design of Kinematics Model of Five-axis Machine Tools with Titling Axis
倾斜旋转轴五轴机床运动学模型的设计
4.
The act of turning on or as if on a pivot.
转动，旋转运动在枢轴上或似乎在枢轴上转动的行为
5.
When swinging transmission machine operation, the force constant rotation axis to make efforts before and axial rotation move backward.
当摇摆传动机械运行时，等速旋转入力轴使出力轴向前和向后旋动。
6.
"Rotary motion of the transmission main shaft carries through the propeller shaft to the differential, causing the rear wheels to rotate."
变速器主轴的旋转运动通过传动轴传递到差速器上,使后车轮转动。
7.
The rotational inertias of uniform rotational rigid surfaces about the around axis
均质旋转面绕旋转轴转动的转动惯量
8.
The motion of the axis of a spinning body, such as the wobble of a spinning top, when there is an external force acting on the axis.
进动当受到外力作用时旋转体轴的运动，如旋转陀螺般的摇摆
9.
They can be pressed into the housing bore directly.Linear ball bearings are only suitable for linear motion.
直线运动球轴承只能用于直线运动，不能作为旋转运动部件的支承。
10.
a shaft with screw thread (the worm) meshes with a toothed wheel (the worm wheel); changes the direction of the axis of rotary motion.
螺纹杆与齿轮相啮合；改变轴旋转运动的方向。
11.
To turn around or as if around a central axis;revolve or rotate.
旋转围绕或仿佛围绕一中心轴而转动；盘旋，旋转
12.
When swinging drive mechanical operation, such as the rotation speed of the force to make efforts axial shaft before and backward rotation and enable higher plane.
当摇摆传动机械运作时，等速度的旋转入力轴使出力轴向前和向后旋转，并使平面升高。
13.
Bar or rod joining parts of a machine or transmitting power in a machine
（机器的）连杆，传动轴，旋转轴
14.
High quality rotary joints and two delicate bearing installed in high-stiffness axle are to ensure vibration-free performance in long-term operation.
高品质旋转接头和2个精密轴承装置在高刚性转轴上,担保长时间运转无振动。
15.
an engine in which the crankshaft is turned by pistons moving up and down in cylinders.
活塞在气缸内部上下运动使得机轴在发动机内旋转。
16.
Hence, the countershaft and all its rigidly connected gears are in motion whenever the drive shaft revolves.
因此，当驱动轴旋转时，副传动轴及与其刚性连接的齿轮都处于运动中。
17.
The moment of a force;the measure of a force's tendency to produce torsion and rotation about an axis, equal to the vector product of the radius vector from the axis of rotation to the point of application of the force.
转矩，力矩一种测量产生扭转和绕轴旋转趋势的力的单位，等于从旋转轴到力作用点的旋转矢量
18.
The handle inputs rotation upon the wheel, then transmitted to another shaft by the belt transmission mechanism.
加上皮带传动机构，手把输入旋转运动于转轮，用皮带传输转动另一个轴。