1.
					
							Effects of Current Density on Properties of Low-Temperature Iron Plating without Pre-etching
						
						
						电流密度对无刻蚀低温镀铁性能的影响
					2.
					
							Effect of pH on structure morphology and properties of low-temperature iron plating
						
					
					
						
						
					
					
						pH对低温镀铁组织形貌及性能的影响
					3.
					
							Effects of Low Temperature Annealing on the Corrosion Resistance of Pulse Electrodeposited Nanocrystalline Ni Coatings
						
						
						低温退火对电沉积纳米晶Ni镀层耐蚀性的影响
					4.
					
							Corrosion Characteristic of Nanocrystalline Ni-Fe Alloy Coating Synthesized by Brush Plating
						
						
						电刷镀纳米晶镍铁合金镀层腐蚀特性的研究
					5.
					
							EFFECT OF DUAL-PULSES ON Al-Mn ALLOY COATINGS ON IRON ELECTRODEPOSITED WITH A LOW TEMPERATURE MOLTEN SALT BATH
						
						
						双脉冲镀对低温熔融盐镀Al-Mn合金层的影响
					6.
					
							Influence of Adulterating Vanadium, Molybdenum and Yttrium on Resistive Corrosion of Zn-Fe Alloy Coating;
						
						
						钒、钼、钇掺杂对锌铁合金镀层耐蚀性能的影响
					7.
					
							Study on Technology of Hot-Dip Aluminizing and High Temperature Oxidation Properties on Steel;
						
						
						碳钢热浸镀铝工艺及抗高温氧化腐蚀性能研究
					8.
					
							Influence of acid pickling on electrodeposition of aluminum on magnesium alloy in room temperature molten salts
						
						
						酸浸蚀处理对AZ91D镁合金室温熔盐镀铝的影响
					9.
					
							low temperature electroplated synthetic diamond impregnated bit
						
					
					
						
						
					
					
						低温电镀人造金刚石孕镶钻头
					10.
					
							low temperature electroplated synthetic diamond sawblade
						
					
					
						
						
					
					
						低温电镀人造金刚石锯片
					11.
					
							Low-temperature Electroless Nickel Plating Technology Based on SLA Prototype;
						
					
					
						
						
					
					
						基于SLA原型的低温化学镀镍工艺研究
					12.
					
							Electrochemistry Analysis of Cu-Sn Alloy of Electroless Tin Plating on PCB
						
					
					
						
						
					
					
						低温化学镀锡液中次亚磷酸钠的作用
					13.
					
							Shallow Etching Rate and Roughness of Etched SiC Surfaces
						
					
					
						
						
					
					
						SiC材料的低速率浅刻蚀工艺研究
					14.
					
							Optimization on gate-recessed AlGaN/GaN HEMT with low damage etching technique
						
					
					
						
						
					
					
						AlGaN/GaN HEMT栅槽低损伤刻蚀技术
					15.
					
							Original plate: Relief printing plate produced bu7 photomechanical etching as distinct from electrotyping.
						
						
						原身版:用照相晒版蚀刻方法造成的凸版。有别于电镀版。
					16.
					
							Anti-chromium Treatment on Steel and Galvanized Steel;
						
					
					
						
						
					
					
						钢铁及钢铁镀锌表面无铬钝化处理技术研究
					17.
					
							Study on Impact Factor of Low-temperature Corrosion Inhibitor in H_2S-HCl-H_2O Environment
						
						
						H_2S-HCl-H_2O腐蚀体系中低温缓蚀剂的影响因素研究
					18.
					
							Corrosion Inhibition Performance of Ethanolamine and KI for Iron with Low Content of Silicon and High Content of Sulfur
						
						
						乙醇胺和KI对低硅高硫铁的缓蚀作用