1.
Study on Cold-sprayed Copper Coating's Properties and Optimizing Parameters for the Spraying Process;
冷喷涂纯铜涂层工艺优化设计及其性能研究
2.
Microstructure and wear resistance of laser clad copper alloy coating on pure copper
纯铜表面激光熔覆铜合金涂层的组织及耐磨性
3.
In the early days copper was normally followed by a relatively thin bright nickel layer with conventional chromium topcoat.
早期，涂覆铜层之后，再涂一薄层光亮镍，然后传统的铬层位于最外层。
4.
Research on Influence of Adding Cu to WC-Co Coatings by Plasma Spraying;
添加剂铜对等离子喷涂WC-Co涂层的影响研究
5.
Preparation and simulation of cold sprayed copper coatings on metal substrate
几种金属基板上冷喷涂铜涂层的试验与模拟
6.
Study on Microstructure and Properties of Copper Coatings Prepared by Cold Spray on Stainless Steel Surface
不锈钢表面冷喷涂铜涂层组织和性能研究
7.
Thermal Spraying Technology of Surface Coatings of the Continuous Casting Mould
连铸结晶器铜板表面涂层热喷涂技术研究
8.
Study on Microstructure and Process of Calorization Based on Pure Copper by Thermal Spraying;
纯铜基体热喷涂渗铝微观组织及工艺的研究
9.
Hydroxyapatite Coatings Plasma Sprayed on Pure Titanium;
纯钛表面等离子喷涂羟基磷灰石涂层的研究
10.
Investigation of Arc-sprayed Aluminium Coating on 6061 Al Alloy and Its Sealing Treatments
铝合金电弧喷涂纯铝涂层及封孔方法研究
11.
Preparation of High Purity Yttria Coating and Research on the Performance
高纯氧化钇涂层制备工艺及性能研究
12.
UEW-E is a kind of double coatings enameled copper round wire, thermal level 155, with polyurethane resin as primer and polyamide resin as finish.
是以聚氨酯树脂为表层涂制而成的，热级为155的双涂层漆包铜圆线。
13.
Effect of Metallic Bonded Coatings Prepared via Different Spraying Methods on the Adhesion of Ceramic Thermal Barrier Coating to Copper Substrate
粘结层喷涂方法对铜基体与热障涂层结合强度的影响
14.
Study on Cu-based Filler Metal Brazed Composite Coating with Particle Reinforced;
铜基钎料钎焊颗粒增强复合涂层的研究
15.
The Corrosive Behavior of a High-Al Bronze Cu-14Al-X and Its Coatings;
高铝青铜Cu-14Al-X及其作粉体涂层腐蚀行为研究
16.
Friction and Wear Properties of Bronze Alloy Powder Coatings
铜合金粉体材料涂层摩擦磨损性能研究
17.
Dispersion characteristics of element Fe in preparation of aluminum bronze alloy powder coating
铝青铜合金粉末涂层制备中Fe元素的扩散特性
18.
Study on Microstructure of WC/Ni-based Alloy Coatings and Interfaces Produced by High Velocity Oxy-fuel Flame Spraying on Copper Surface;
紫铜表面高速火焰喷涂WC/镍基合金涂层及界面的显微组织研究