1.
Research and Development of Auto Sterilizer Controlling System Based on ARM;
基于ARM的自动灭菌控制系统的开发与研究
2.
Wet Pack after Steam Sterilization:Analysis and Management
压力蒸汽灭菌湿包的原因分析与控制
3.
Quality control of microbiological laboratory′s pressure steam sterilization
微生物实验室压力蒸汽灭菌质量控制
4.
Research of Auto Sterilizer Controlling System Based on Embedded System;
基于嵌入式系统的自动灭菌器控制系统的研究
5.
A Temperature Fuzzy Control of Sterilizing and Drying Machine Base on S7-200;
基于S7-200安瓿灭菌干燥机温度模糊控制
6.
Design of Fuzzy Controller in Pulse Vacuum Sterilizer Control System
脉动真空灭菌器加热系统的模糊控制器设计
7.
Development of Control System of Pulsant Vacuum Sterilizer Based on CPLD
基于CPLD的脉动真空灭菌器控制系统开发
8.
Design of Temperature Control System for Beer Pakistan Antiseptic Machine Based on AT89S52
基于AT89S52对啤酒巴氏灭菌机温度控制系统的设计
9.
The manufacturer shall subject the medical device to a validated sterilization process and record all the control parameters of the sterilization process.
制造业者依确认之医疗器材灭菌过程处理,并记录所有灭菌过程之控制参数。
10.
The Exploration of the Sterility Assurance System and the Key Control Factors for Parametric Release of the Terminally Sterilized Drug Product;
最终灭菌药品无菌保证体系和参数放行的关键控制因素探讨
11.
Radiation Sterilization is a especial process which result can not been examined by experiment afterwards, the process controlling should be implemented in irradiation sterilization.
【中英文摘要】辐射灭菌是个不能用事后检验验证的特殊过程,对辐照灭菌过程应实施过程控制。
12.
After the prospective validation has been completed, change control systems are established to ensure that sterilizers are maintained in a state of control.
前验证完成后，建立变更控制系统，以确保灭菌器保持在受控状态。
13.
destroying bacteria or inhibiting their growth.
消灭或抑制细菌生长。
14.
Record the process control data of every sterilization lot.
在每一灭菌批中被使用的过程控制参数进行记录。
15.
Control Principle and Emergency Troubleshooting of Pulsation Vacuum Steam Sterilizer Arithmometer
脉动真空蒸汽灭菌器计数器控制原理及应急维修
16.
Advances in researches on ozone’s bactericidal mechanism and control technologies for DBP bromate
臭氧灭菌机理及消毒副产物溴酸盐控制技术研究进展
17.
Destroying or inhibiting the growth of bacteria.
抗菌的消灭或抑制细菌生长的
18.
Improper inputs from thermocouples, pressure gauges, etc., can compromise the most sophisticated microprocessor controlled sterilizer.
对热电偶、压力计的输入错误，会对非常复杂先进的微处理器控制的灭菌器造成危害。