说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 腹板高厚比
1.
Study on Width-thickness Ratio of the Web for Monosymmetric I-sections Steel in Plastic Design;
单轴对称工字形截面塑性设计的腹板高厚比研究
2.
The Analysis of Y Style Eccentrically Braced Steel Frames under Cyclic Load Condering Links Web Changed the Height-thickness Ratio;
考虑耗能段腹板高厚比变化时Y型偏心支撑钢框架在循环荷载作用下的滞回性能研究
3.
Experimental study on effect of link beam web depth-thickness ratio on energy-dissipation of Y-shaped eccentrically braced steel frames
耗能段腹板高厚比对Y型偏心支撑钢框架滞回性能影响的试验研究
4.
Theoretical and Test Studies on Width to Thickness Ratio Limitation of Cut T-shape Web Subject to Axial Compression;
部分T型钢轴压杆腹板宽厚比限值试验与理论的研究
5.
This piece of wood is thicker than that.
这块木板比那块厚。
6.
plate iron that is thinner than boilerplate but thicker than sheet iron or stovepipe iron.
比锅炉钢板薄但比烟囱钢板厚的一种钢板。
7.
Development and Application of High Accuracy Gauge Control for Plate Mill
中厚板高精度厚度控制的研究与应用
8.
Analysis of Reasonable Thickness of Vertical Web of Main Girder in Cable-stayed Bridge
斜拉桥箱形主梁直腹板的合理厚度分析
9.
a long thin board with one edge thicker than the other; used as siding by lapping one board over the board below.
一边比另一边厚的长薄板。
10.
This was rather easy to do, for the paper was not much thicker than pasteboard.
这很容易做,因为纸并不比纸板厚多少。
11.
Unified Analysis of Limiting Width-Thickness Ratio of Plate Elements in Axially Compressed Members
轴心压杆板件宽厚比限值的统一分析
12.
STUDY ON THE WELDING OF THE Q345GJD HEAVY PLATE WITH THE THICKNESS OF 100 mm FOR HIGH-RISE BUILDING
100mm厚高层建筑用Q345GJD特厚板的焊接性能研究
13.
Effects of web thickness and width of a channel section steel on its bending behavior
带材厚度及其腹板宽度对简单断面型钢成型的影响
14.
The Construction Technology Research on High-rise Building with Thick Transfer Floor;
高层建筑厚板转换层的施工技术研究
15.
Analysis of High-Rise Building Transfer Thick Slab;
高层建筑厚板结构转换层的内力分析
16.
Perfect Descaling System,Improve Surface Quality of Midium Plate
改善除鳞系统,提高中厚板表面质量
17.
Development of 110 mm Thickness FH32 High Toughness Hull Plate
110mm厚高韧性船板FH32的开发
18.
Study on Improving the Low-temperature Impact Toughness of 3.5% Nickel Heavy Plate
提高3.5Ni厚钢板低温冲击韧性的研究