1.
The Research on the Response of Haydite Concrete Small.sized Hollow Block Masonry under Shear Compression Loading;
陶粒混凝土砌块砌体剪压复合受力性能研究
2.
Experimental Study on the Shear-Compression Behavior of the Autoclaved Aerated Concrete Bearing Masonry;
蒸压加气混凝土承重砌体剪压复合受力性能试验研究
3.
Calculation of shear bearing capacity of complex strengthening reinforced concrete short column
复合加固钢筋混凝土短柱的受剪承载力计算
4.
The Experimental Study on Anti-seismic Ability of High axial Ratio Composite Energy Dissipation Shear Wall;
高轴压比复合消能剪力墙抗震性能的试验研究
5.
Experimental Study of Oblique Section Shear Capacity of Profiled Steel Plate-concrete Composite Slab
压型钢板——混凝土组合楼板斜截面受剪承载力试验研究
6.
Experimental Study on Torsional Behavior of CFS Strengthing RC Box Beams Subjected to Combined Action of Bending-Shear-Torsion;
CFS加固弯剪扭复合受力的钢筋混凝土箱梁抗扭性能的试验研究
7.
Research on Combined Planar Compression-Shear Techenique by Using Split Hopkinson Bars;
Hopkinson杆平面压剪复合加载实验技术研究
8.
Nonlinear Simulation of Brick Masonry under Shear-compression Loading
剪压复合作用下砖砌体的非线性模拟
9.
Relatively comprehensive test study on the strength capacity of the reinforced concrete beam under bending moment, shear force and axial tensile force was carried out.
对弯、剪、轴拉复合受力状态下钢筋混凝土梁的承载能力进行试验研究。
10.
Researches on Microstructures and Properties of Extrusion-Shearing Deformation for the Magnesium Alloy
镁合金挤压剪切复合变形的组织与性能研究
11.
Study on a New Type Composite Structural System with Concrete Shear Wall;
新型复合混凝土剪力墙结构体系研究
12.
Compound Wall Element Model and Experiment Study of Shot-leg Shear Wall;
短肢剪力墙复合墙元模型及试验研究
13.
Shear Lag Experimental Analysis of Composite Material Thin-wall Box Beam
复合材料薄壁箱梁的剪力滞试验分析
14.
The production and construction of compound concrete shear wall structure
复合混凝土剪力墙结构的生产和施工
15.
Seismic Shear Capacity for Brick Masonry Wall Strengthened with GFRP
GFRP复合材料加固砖墙抗震抗剪承载力
16.
Shear resistant behavior of axially loaded high-strength concrete-filled steel tubular stub columns
圆钢管高强混凝土轴压短柱受剪承载力分析
17.
And present the ripple-disc to produce shear-squeeze composite force during working so that transmission torque can be increased greatly.
提出了一种波纹曲面圆盘，以它产生的剪切-挤压复合作用来提高传动力矩。
18.
Experimental study of composite shear wall slab under cyclic loading
反复荷载作用下复合剪力墙板的试验研究