1.
Behavior of equal channel angle pressing used on Mg-Mn-Zn-Ce alloy
稀土Mg-Mn-Zn-Ce合金等通道转角挤压工艺
2.
Microstructures and Mechanical Behaviors of Mg-Mn-Zn-Ce Alloy Subjected to Equal Channel Angle Pressing;
等通道转角挤压Mg-Mn-Zn-Ce合金的显微组织及力学行为
3.
Determination of each element in alloy Mg-Mn-Ce by ICP emission spectrometer
ICP发射光谱仪测定Mg-Mn-Ce合金中各元素的含量
4.
Research on Drawing Process and Structure and Properties of Mg-Zn-Mn-Y Magnesium Alloy
Mg-Zn-Mn-Y镁合金拉拔工艺及组织性能的研究
5.
EFFECT OF SOLUTION TREATMENT ON ELECTROCHEMICAL PERFORMANCE OF Al-Zn-In-Mg-Ti-Mn ALLOYS
固溶处理对Al-Zn-In-Mg-Ti-Mn合金电化学性能的影响
6.
Effcet of extrusion on mechanical properties and corrosion behavior of Mg-Mn-Zn alloy
挤压对Mg-Mn-Zn合金力学性能和腐蚀行为的影响
7.
Salt spray corrosion properties of the paint coatings rich in Zn-Al-Mg-Ce alloy powders
富Zn-Al-Mg-Ce合金油漆涂层的盐雾腐蚀性能研究
8.
Study on Grain Refinement of AZ31 Wrought Magnesium Alloy by Mg-Zn-Y-Mn Quasicrystal Master Alloy
Mg-Zn-Y-Mn准晶中间合金对AZ31变形镁合金的晶粒细化研究
9.
Effects of Solution Treatment on Hot Deformation Process and Deformed Microstructure of Mg-2.0%Zn-0.7%Mn Alloy
固溶处理对Mg-2.0%Zn-0.7%Mn合金热变形过程及变形组织的影响
10.
Preparation of Mg-Li Mg-Li-Zr Zn-Zr Alloys by Electrolysis in Molten Salt;
熔盐电解制取Mg-Li Mg-Li-Zr Zn-Zr合金
11.
Study of Thermal Fatigue on Al-Cu-Mn-Ti-Ce Alloy;
Al-Cu-Mn-Ti-Ce合金热疲劳性能的研究
12.
The study in preparing high Mn-content Mg-Mn interalloy by stirring cast
搅拌铸造法制备高含Mn量Mg-Mn中间合金
13.
High Strength Deflection Aluminium Alloy --Al-Zn-Mg-Cu Alloy;
高强度变形铝合金———Al-Zn-Mg-Cu系合金
14.
A Study on Process and Fundamentals of Zn-Mn Alloy Electrodeposition;
Zn-Mn合金电镀工艺及其基础理论研究
15.
Study on Microstructure and Properties of Al-Mg-Mn Alloy Processed by Equal Channel Angular Pressing;
Al-Mg-Mn合金ECAP变形组织与性能的研究
16.
Study on the Microstructure and Properties of Al-Mg -Mn-Zr-Er Alloy
Al-Mg-Mn-Zr-Er合金组织和力学性能研究
17.
Research on the Behavior of Magnesium-Manganese Alloy under Mechanical Circumstance
Mg-Mn合金在力学环境下的行为研究
18.
Strengthen-toughening of Al-Cu-Mg-Mn-Zr Alloys
Al-Cu-Mg-Mn-Zr合金强韧化技术研究