1.
Application for Pre-deviation Compensation for Cantilever End Displacement of Steel Truss Arch Bridge in Non-stress Closure Construction
预偏补偿悬臂端位移在钢桁架拱桥跨中无应力合龙施工中的应用
2.
Remove rear lower suspension arm bolts.
拆卸后下端悬吊臂螺栓。
3.
DAMAGE ASSESSMENT OF HELICOPTER BLADE BASED ON CANTILEVER BEAM DISPLACEMENT MODEL
基于悬臂梁位移模型的直升机桨叶损伤检测
4.
Displacement Exact Solution of Uniform Cantilever Beam under Distributed Load
等截面悬臂梁受均布荷载作用时位移的精确解
5.
travelling portal jib crane
门式移动悬臂起重机
6.
cantilever walking crane
壁装移动式悬臂起重机
7.
The Crack-mending and Intensifying of Cantilevered End of Cantilever Hollow Pier
大悬臂空心墩悬臂端结构裂缝病害的加固处理
8.
Analytic Solution to Piezoelectric Cantilever Beam with Concentrated Force at Free End;
悬臂压电梁自由端受集中力的解析解
9.
DYNAMICAL BEHAVIORS OF RESTRAINED CANTILEVER PIPE CONVEYING FLUID
端部约束悬臂输流管道的动力学特性
10.
Research and Application of Correlation between Beam End Displacement and Temperature of Long-span Suspension Bridge
大跨悬索桥梁端位移与温度的相关性研究及其应用
11.
These capacity charts show the figures when handling load off main boom head sheaves in a case of mounting fly jib on top of main boom.
这些功能表显示了在主悬臂顶端安装飞臂情况下将负载操作离开主悬臂头滑轮时的数据。
12.
a cantilever bridge in Quebec.
位于魁北克省的一座著名的悬臂桥。
13.
Remove the upper suspension arm nut and bolt at the axle bracket.
从车轴支架上拆去上端悬吊臂螺帽和螺栓。
14.
Remove the lower suspension arm nut and bolt from the axle bracket.
从车轴支架上拆去下端悬吊臂螺帽和螺栓。
15.
Position the lower suspension arm at the axle bracket and rear bracket.
把下端悬吊臂放在车轴支架和后侧支架上。
16.
Real Time Correction System of Probe Tip Shaking of Long Cantilever CMM
长悬臂三坐标测量机测端抖动实时修正系统
17.
Considering the difference of cantilever plate between the end and the middle of the concrete box bridge, the chief influence factor is studied.
考虑箱梁端部和跨中悬臂板根部的区别，研究了影响变厚度悬臂根部弯矩的主要因素。
18.
Effect of Axial Pressure Force on Horizontal Displacement of Cantilever Column
轴压力对钢筋混凝土悬臂柱水平侧移的影响