1.
The Study on the Techniques of Rolling Compaction Controlling of High Fill Embankment
高填方路基填筑碾压工艺控制的现场试验研究
2.
Equipment Choice and Rolling Craft of Roller Type Lean Concrete Base
碾压式贫混凝土基层碾压设备选型及碾压工艺
3.
Application of impact rolling technology in Dongqing dam filling
冲碾施工技术在董箐大坝填筑中的应用
4.
The Research of Construction Techniques of Rccd in the High Altitude and Cold Zone;
高寒地区碾压混凝土坝施工工艺研究
5.
The Research of Technique and Quality Verifying of Compacting Railway Roadbed for Beijing-Shanghai High-Speed Railway;
京沪高速铁路填筑路基施工工艺与压实质量检验研究
6.
3-D Modeling and Simulation of Pipe Culverts and Its Pressing Optimization under the Effect of Road Roller;
公路涵管填土碾压的三维仿真与碾压优化
7.
The control technology of highway asphalt pavement paving and rolling process
高速公路沥青路面摊铺碾压工艺控制技术
8.
Studies on Embankment Matials Test and Compacting Test of Shui Niujia Power-station Embankment Dam Project;
水牛家水电站大坝工程施工期筑坝材料试验及碾压试验研究
9.
Probe into Reclamation Techniques of Clay Sloping Core Roch-fill Dam of Zhangfeng Reseroir
张峰水库粘土斜心墙堆石坝填筑施工工艺探讨
10.
Analysis of construction technology with graded broken stone fill in top of subgrade for passenger dedicated line;
客运专线基床表层级配碎石填筑施工工艺分析
11.
Filling construction technology and method for gravel soil core of Nuozhadu Rock-fill Dam with Core
糯扎渡大坝心墙掺砾土料填筑施工工艺及方法
12.
Mxi Proportion and Construction Technique Behaviors of Rcc in Laboratory;
碾压混凝土的配合比设计及其室内工艺性能试验研究
13.
Sandbag Sloping Dike Body Construction Technics in Deep-water;
深水袋装砂斜坡堤堤心筑填工艺研究及应用
14.
High-speed railway embankment filling technology and quality control experiment research
高速铁路路堤填筑工艺及质量控制试验研究
15.
When the whitening chamber design of a rice whitener is different, also the rice whitening technology characteristies are different during whitening.
碾米机的碾白室结构设计不同，碾米机在碾白过程中表现出不同的碾米工艺特点。
16.
The Research on Construction Techonology and Quality Control for Filled Subgrade with Improved Expansive Soil;
改良膨胀土填筑路基的施工工艺及质量控制技术研究
17.
The construction technique of stea m rolling concret for shangkou power station were elaberated and some measures adopted in the process of quality control were cluscussed too.
叙述了山口电站碾压砼的施工工艺,以及在质量控制过程中采取的措施.
18.
3-D FEM Stress Analysis on Bottom Diversion Outlet and Notch Segment and Research of Construction Techniques of RCC Gravity Dam in the Cold and Drouthy Zone;
寒冷干旱地区高碾压混凝土坝底孔缺口坝段三维有限元应力分析与施工工艺研究