1.
Numerical Simulation of Heat and Mass Transfer in Ablation Layers of Re-Entry Space Vehicles;
再入飞行器烧蚀层内热质传输过程的数值模拟
2.
Effects of cryogenic target misalignment and capsule nonuniformity on deuterium-tritium layer uniformity
冷冻靶校准误差和烧蚀层粗糙度对氘氚层均匀性的影响
3.
SiC-HfSi_2-TaSi_2 HIGH TEMPERATURE ANTI-ABLATION COMPOUND COATING ON CARBON/CARBON COMPOSITES
碳/碳复合材料SiC–HfSi_2–TaSi_2抗烧蚀复合涂层
4.
Microstructures of Ablated Carbon Layer of C_f/PAA Composite
C_f/PAA复合材料烧蚀“碳层”的微观结构
5.
Preparation of Anti-ablation HfC Coating on C/C Composite Material
C/C复合材料抗烧蚀HfC涂层的制备
6.
Research Progress of Anticorrosion Coatings for Sintered NdFeB Permanent Magnet
烧结NdFeB永磁体耐蚀涂层的研究进展
7.
Ablative Mechanism of APP/Phyllo-Silicate/UPR Inhibitor
APP/层状硅酸盐填充UPR包覆层的耐烧蚀机理
8.
Ablation of Diamond Grain by Laser and Analysis of Its Affected Layer and Micro-crack
激光烧蚀金刚石磨粒及其变质层与微裂纹分析
9.
Progress and Prospect of Ablation Resistance of Insulation of EPDM Rubber
三元乙丙橡胶绝热层耐烧蚀性能的研究评述
10.
Preparation and Study of Thermal Barrier and Ablative Coating Based on Nanozirconia;
纳米氧化锆基热障烧蚀复合涂层的制备与研究
11.
Research on Characteristic of Heat Transfer and Ablation of Insulation in the Solid Rocket Ramjet Chamber
冲压发动机补燃室内绝热层传热烧蚀特性研究
12.
EFFECT OF ORGANIC TOP COATING ON ANTICORROSION PERFORMANCE OF SINTERED Zn-Al COATING
有机覆膜对热烧结锌铝涂层耐腐蚀性能的影响
13.
Heat Transfer and Ablation of Insulation in Second Combustion Chamber with Different Configuration in SRR
不同构型固冲发动机补燃室绝热层传热烧蚀
14.
Application of Coated Red Phosphorus in the Anti-ablative Modification of UPR Inhibitor
包覆红磷在UPR包覆层耐烧蚀改性中的应用
15.
Ablation of nozzle convergent section insulation of solid rocket motors with long aft-finocyl grain
大后翼装药固体发动机喷管收敛段绝热层烧蚀
16.
seizing by fusion
烧蚀(例如活塞的)
17.
Experimental Study of Insulation Ablation Eroded by High-Temperature and Dense Two-Phase Flow;
高温稠密两相流冲刷条件下绝热层烧蚀实验研究
18.
Corrosion Resistance of WC Coatings Sprayed by AC-HVAF on Aluminum Alloy in Neutral Salt Spray
铝合金表面活性燃烧高速燃气喷涂WC涂层的耐中性盐雾腐蚀性能