1.
Technology of Generating NC Tool Path for Subdivision Surfaces Based on Catmull-Clark Scheme;
基于Catmull-Clark模式的细分曲面NC刀具轨迹生成技术
2.
Research on Tool-path in the Process of Sculptured Surface NC-machining;
复杂型面NC加工过程中刀具轨迹的研究
3.
Research on Techniques of Information Extraction and Toolpath Planning Based on STEP-NC;
基于STEP-NC的信息提取及刀具轨迹规划技术研究
4.
Research on turning interpreter and tool path generator based on STEP-NC
基于STEP-NC车削解释器及刀具轨迹生成器的研究
5.
Tool Path Planning for 5-Axis NC Machining Based on Iso-Scallop Method;
基于等残留高度法的五轴NC加工刀位轨迹规划
6.
Abstract: When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
文摘:在生成NC铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。
7.
When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
在生成NC铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。
8.
The key technical research in interference-free tool path of torus cutter
圆角刀无干涉刀具轨迹关键技术研究
9.
Tool Path Calculation of NC Machining Based on Actual Profile of Cutter
基于刀具实际廓形的数控加工刀具轨迹计算
10.
Offset Algorithm Based Tool-path Planning for NC Machining;
基于等距法的数控加工刀具轨迹规划
11.
The Tool Path Generation Software System for 2Dimensions Numerical Control;
二维数控刀具轨迹自动生成软件系统
12.
Pocket tool path optimization in high speed milling;
型腔高速铣削加工刀具轨迹优化研究
13.
Tool Path Planning for High Speed Milling of Free-form Surface with Toroidal Cutter
环形刀具高速铣削自由曲面轨迹规划
14.
System for Tool Path Generation of 2D Contour Milling of Die;
模具二维轮廓铣削加工刀具轨迹生成系统
15.
Research on High Speed Milling Forces and Cutter Path Optimizing;
高速铣削切削力变化及刀具轨迹优化研究
16.
Tool-path Programming Based on Reverse Engineering in NC Machining;
基于反求的数控加工刀具轨迹的路径规划
17.
Research on Technical Parameters and Cuttingtool Path of NC Machining Process;
数控切削加工工艺参数及刀具运动轨迹的研究
18.
Research on Direct Generation of NC Tool Path from Point Cloud;
基于点云的数控加工刀具轨迹直接生成的研究