1.
Experiment and Theory Study on Incremental In-Plane Bending;
非连续加载面内弯曲实验与理论研究
2.
Ratcheting Study of Pressurized Elbows Subjected to Reversed In-plane Bending
内压弯管在面内循环弯曲载荷作用下棘轮效应的研究
3.
Specimen for surface crack growth by loading at cantilever bend and application
一种悬臂弯曲加载表面裂纹扩展试样及其应用
4.
Research and Application of Strand's New-ideal Continuous Straightening Curve
新型连续弯曲矫直曲线的研究与应用
5.
LOADING CAPACITY AND STRENGTHENING METHODS OF GLASS RIB IN GLASS CURTAIN WALL
面内受弯玻璃肋的承载性能及加固方法研究
6.
It is obvious that the loading of Fig. 1-9 (a) produces both direct tension and bending stress on the cross section.
显然，图1—9（a）的加载在截面上产生了正的拉应力弯曲应力。
7.
The In-Plane Stability Carrying Capacity Analysis of Beam-Columns Considering the Post-Buckling Strength of the Web;
考虑腹板屈曲后强度压弯构件平面内稳定承载力研究
8.
Experiment on bending of Al_2O_3 ceramic slice with CO_2 CW-laser
Al_2O_3陶瓷薄片CO_2连续激光弯曲试验
9.
Sensitivity Analysis on the Elastic Buckling and Ultimate Strength of Continuous Stiffened Aluminium Plates Under Combined In-Plane Compression and Lateral Pressure
平面内压力和侧向压力组合作用下连续加劲铝板弹性屈曲和极限强度的敏感性分析
10.
Dragonflies are glancing and zigzagging over the pond
蜻蜒在池面上弯曲点水，断续闪光。
11.
Optimization of Continuous Bending and Straightening Curve of Vertical-Arc Slab Caster
直弧型板坯连铸机连续弯曲矫直曲线的优化研究
12.
The Nonlinear Analysis of Coupled Bending and Torsion Vibration of Internal Combustion Engine Crankshaft
内燃机曲轴弯扭耦合非线性振动分析
13.
The Experimental Study on the Effect of the Continuous Bends Flow to Navigation
连续弯曲航道水流条件对通航影响的试验研究
14.
Filling Curved Canal Using Continuous Wave of Condensation Technique in Vitro
连续波充填技术充填弯曲根管的实验研究
15.
The pouring construction technology of small radius flat curve continuous steel bridge cantilever
小半径平弯曲线连续刚构桥悬臂浇筑施工技术
16.
Algorithm for constructing G~2 continuous interpolation curve on developable surface
可展曲面上G~2连续的曲线插值方法
17.
glass ,curved, bent or hollowed (excl. optical elements and optically worked glass) for non-corrective or corrective spectacle lenses
曲面、弯曲或空心玻璃（不包括光学元件和经光学加工的玻璃）用于制作非矫正视力镜片
18.
Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment
面内弯矩下双弯头组合管件的极限载荷研究