1.
Effect of sputtering parameters on texture of Cu films
磁控溅射工艺参数对Cu薄膜织构的影响
2.
Deposition of Al Oxide-Doped ZnO Films on Substrates of Polythylene Terephthalate Nonwovens
PET纤维基AZO透明导电薄膜溅射工艺参数的优化
3.
Influence of Technological Parameters on Binding Ability of Stainless Steel Film by Magnetron Sputtering
磁控溅射工艺参数对不锈钢薄膜结合性能的影响
4.
Study on the Effects of Magenetron Sputtering Deposition Parameters to the Integrated Tribological Properties of DLC Films
磁控溅射工艺参数对DLC膜的综合摩擦学性能影响研究
5.
Influence of Craft Parameters on Surface Morphology and Microstructure of NdFeB Thin Films
磁控溅射工艺参数对NdFeB薄膜表面形貌及相结构的影响
6.
Effect of Process Parameters on the Adhesion of Magnetron Sputtered Copper and Aluminum Coatings on Gadolinium Substrate
磁控溅射工艺参数对Cu,Al薄膜与Gd基底附着性的影响
7.
PROCESS PARAMETERS DETERMINATION OF ETCHING LITHOGRAPHY SERVO DISK BY HF SPUTTERING
利用高频溅射刻蚀光刻伺服盘工艺参数的确定
8.
Effect of Process Parameters on the Deposition of DC Magnetron Sputtered Films
工艺参数对直流磁控溅射膜沉积的影响
9.
Plasma emission diagnostics for the optimization of deposition parameters in RF magnetron sputtering of GaP film
等离子体发射光谱诊断用于射频磁控溅射GaP薄膜的工艺参数优化
10.
The Craft Study on Color of ZrN Decorative Coating by Mid-Frequency Reactive Magnetron Sputtering;
中频反应磁控溅射制备氮化锆薄膜及颜色制备工艺参数研究
11.
Effect of Technological parameters on deposition rate of ZAO films prepared by DC magnetron reactive sputtering
工艺参数对直流反应磁控溅射ZnO:Al薄膜沉积速率的影响
12.
Influence of operating parameters on discharge characteristics of planar DC magnetron
工作参数对平面直流磁控溅射放电特性的影响
13.
Influence of Operation Conditions on Deposition Rate of Planar DC Magnetron Sputtering
工作参数对平面磁控溅射系统沉积速率的影响
14.
Design Study on Spouted Water Process Parameters of Hydraulic Incision Facility
水力割缝工具射流工艺参数设计研究
15.
Study on the Process and Properties of ZAO Film Prepared by Magnetron Sputtering at Low Temperature
低温磁控溅射ZAO薄膜工艺及性能研究
16.
Effect of sputtering technology on magneto-optical properties of GdTbFeCo thin films
溅射工艺对GdTbFeCo薄膜磁光性能的影响
17.
Growth of Indium Tin Oxides Films by Magnetron Sputtering
ITO薄膜的磁控溅射工艺优化研究
18.
Study on the Technology Parameters Optimization of Hydraulic Slotting Casing Perforation;
水力喷砂割缝射孔工艺参数优化研究