1.
The Fundamental Research on MoS_2/Zr Self-lubricating Coated Tools;
MoS_2/Zr“软”涂层自润滑刀具的研究
2.
Design and Development of Self-lubricating Ceramic Cutting Tool and Study on Its Self-lubricating Mechanism;
自润滑陶瓷刀具的设计开发及其自润滑机理研究
3.
Usage: lubricate cutter before starting work, lubricate it every one hour.
使用方法：工作前润滑刀具，每个小时润滑一次。
4.
Experimental Research on Tool Wear in High Speed Milling of PH13-8Mo Stainless Steel with Cryogenic Minimum Quantity Lubrication
低温微量润滑高速铣削PH13-8Mo刀具磨损试验研究
5.
Machining Performance of Micro-pool Tools
微池润滑刀具干切削过程中的减摩机理
6.
Research on Cutting Experiment in Combination with Microdose Cooling and Lubrication Coated Tools
微量润滑冷却与涂层刀具结合的切削试验研究
7.
The Development of Small Water Vapor Generator and Research on Tool Wear with Water Vapor as Coolants and Lubricants;
小型蒸汽发生器研制及水蒸汽冷却润滑时刀具磨损的研究
8.
In-situ formation of RE oxysulfide with self lubricating function during cutting process of cemented carbide tool
硬质合金刀片切削过程中自润滑功能稀土氧硫化物的原位形成
9.
DEVELOPMENT TEST OF MULTIPLE DIE WITH HYDRAULIC COMPENSATION AND AUTO LUBRICATION
多冲模液压补偿和自动润滑模具的研制试验
10.
A device for applying a lubricant.
润滑器由于加润滑剂的器具
11.
pneumatic-tool oi
气体输送工具润滑油
12.
Through analyses carried out with SEM, tool failure patterns under different cooling and lubricating modes were studied.
借助扫描电镜的检测手段，研究了不同冷却润滑条件下刀具的失效形式。
13.
The experimental results indicate that cryogenic nitrogen gas jet with minimal quantities of lubricant is the most effective cooling and lubricating mode to reduce milling force and to retard tool wear.
试验结果表明，低温氮气射流结合微量润滑能够最有效地降低铣削力，抑制刀具磨损。
14.
Gliding system can adjust the knives accurately and quickly.
滑动式调刀系统，调整刀具准确、快捷。
15.
The machined self lubricating composite tail rotor gears will stand up to the most aggressive 3D flying.
加工自润滑复合材料尾桨齿轮都会挺身而出最具侵略性3D飞行.
16.
greaser ,machine, automatic, pump-type
泵注式自动加润滑脂机
17.
fully sealed & self-lubricated bearing
全密封自动润滑轴承
18.
ALFA (Air Lubricated Free Attitude)
空气润滑的自由位置