1.
Study on the Production of Heat-resistant Aluminum Alloy Pipe Blanks with Large Dimensions by Multi-layer Spray Deposition;
多层喷射沉积制备大尺寸耐热铝合金管坯的研究
2.
PIV Simulation and Optimization for Melt Flow in Continuous Casting of Aluminum Alloy Slab;
铝合金板坯连铸PIV模拟及工艺优化
3.
New Technology for Preparing Semi-Solid Billets of LC9 Aluminum Alloy
LC9铝合金半固态坯料制备工艺研究
4.
Producing 3004 aluminum alloy deep-drawing slabs by casting-rolling method
采用铸轧法生产3004铝合金深冲板坯
5.
Superplasticity Research on Semi-solid Blank of 7A09 Aluminium Alloy
7A09铝合金半固态坯料超塑性研究
6.
Discussion of casting and rolling process to make 3004 aluminium alloy strip plate
铸轧法生产3004铝合金带坯工艺探讨
7.
Discuss on cast-rolling technology of 5754 aluminium alloy strips
5754铝合金铸轧板坯生产工艺探讨
8.
Preparation of Semi-solid Billet and Reheating of Hypoeutectic Al-Si Alloy;
亚共晶铝硅合金半固态坯料的制备及二次加热
9.
DPIV Physical Simulation of Melt Flow in a Mould during the Continuous Casting of Aluminium Alloy Slab;
铝合金板坯连铸过程流动现象的DPIV物理模拟
10.
Research on Electromagnetic Semi-continuous Casting of 7050 Aluminium Alloy Slab;
7050铝合金板坯电磁半连续铸造技术研究
11.
Simulation and Preparation Studies on Continuous Casting of Cladding Aluminum Alloys under Direct Current Magnetic Field
直流磁场下铝合金复层铸坯制备与模拟研究
12.
Research on Soft-contact Electromagnetic Continuous Casting Technology of Ultra High Strength Aluminium Alloy Slabs
超高强铝合金板坯软接触电磁连铸工艺研究
13.
Failure Analysis of 2A14 Aluminum Alloy Bar during Machining Process
2A14铝合金棒材毛坯件车削加工开裂原因分析
14.
Wire、bar or tube drawing dies--As sintered pellets of hard metal
GB/T6883-1995线、棒和管拉模用硬质合金模坯
15.
Study on Compound Fabrication of Semi-solid Billet of Near-eutectic Al-Si AlloyBased on SIMA Method;
基于SIMA法的近共晶点铝硅合金半固态坯料复合制备研究
16.
Aluminium and aluminium alloys--Compression test method for tubes
GB/T3251-1982铝及铝合金管材压缩试验方法
17.
Wrought aluminium and aluminium alloy-Welded tube
GB/T10571-1989铝及铝合金焊接管
18.
Wrought aluminium and aluminium alloy--Drawn (or rolled)tubes for commercial usage
GB/T6893-1986工业用铝及铝合金拉(轧)制管