1.
Characterization of hafnium oxide coatings on low activation Martensitic steel at various O_2/Ar flow ratios
氧氩比对低活化马氏体钢表面氧化铪涂层性能的影响
2.
Study of Structure and Optical Properties of Aldoped ZnO Nanofilms Prepared in different Ar/O_2 and Sputtering Power
氧氩比与溅射功率等对Al掺杂ZnO薄膜结构和光学特性影响的研究
3.
Influence of Ar/O_2 Ratio on Microstructures and Properties of Al_2O_3 Thin Films
氩氧比例对Al_2O_3薄膜结构及性能的影响
4.
Effect of Ar/O_2 ratio on properties of ZnO film and development of ultraviolet photodetector
氩氧比对ZnO薄膜特性的影响与紫外探测器的研制
5.
Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques.
为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。
6.
THE NEW CRAFT OF AOD IN PRODUCTION OF MEDIUM,LOW, SIMPLEX CARBON FERROCHROMIUM
氩氧炉生产中、低、微碳铬铁的新工艺
7.
Distillation of Rare-Earth Elements in Argon-Oxygen Direct Current Arc
稀土元素在氩-氧直流电弧中的分馏
8.
Thermodynamic Analysis of Hydrogen-Carbon-Oxygen-Argon System for Coal Pyrolysis in Hydrogen-Argon Thermal Plasma
氢/氩热等离子体裂解煤碳-氢-氧-氩多相多组分体系的热力学分析
9.
For example, the ratio of argon 36 to argon 40 on Mars is only about one-ninth the ratio found on Earth.
例如，火星上氩36与氩40之比，大致只有地球上的比率的九分之一。
10.
" Determination of trace argon, nitrogen and krypton in oxygen--Gas chromatographic method"
GB/T14605-1993氧气中微量氩、氮和氪的测定气相色谱法
11.
Fabrication of Three-dimensional Microstructure by Argon Ion Laser Curing of Epoxy Resin
氩离子激光固化环氧树脂制作三维微结构
12.
Fluorination Reaction Under Ar-O2 Controlled Atmosphere DC Arc Discharge
氩氧控制气氛下直流电弧放电中氟化反应
13.
A STUDY ON ARGON-OXYGEN COMBINATION BLOWING PROCESS FOR LOW-CARBON CAST STAINLESS STEEL
氩-氧复合吹炼法生产低碳不锈铸钢的试验研究
14.
Discussion on analyzing oxygen and argon in hydrogen production by chemical way auxiliarily;
用化学辅助法对氢气中氧氩分析的讨论
15.
Brief Discussion on Modification and Commissioning of Argon Producing System for a 15000m~3/h Oxygen Plant
浅谈15000m~3/h制氧机制氩系统的改造与调试
16.
DYNAMIC ANALYSIS OF SPECIFIC HEAT DENSITY OF Ar ARC BRAZING ZONE
氩孤钎焊加热区比热流分布的动态分析
17.
Comparative Analysis of Residual Stress in Tungsten Inert Gas Arc Welding with Continuous and Discontinuous Condition
钨极氩弧连续和间断焊接的残余应力对比分析
18.
Comparison of fatigue properties between friction stir welds and TIG welds for Al alloy
搅拌摩擦与氩弧焊铝合金接头疲劳性能的比较