说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 安全坯壳厚度
1.
Minimum Mould Exit Shell Thickness of Round Blooms for Peritectic Steel Casting
包晶钢圆坯结晶器出口安全坯壳厚度的研究
2.
Measurement of the Solidified Shell Thickness in the Secondary Cooling Zone of Continuous Casting of Bloom
大方坯连铸二冷区凝固坯壳厚度测试
3.
Study on Solidified Shell Thickness Measurement and the Solidified Shell Shape of Slab
连铸板坯坯壳厚度测定及凝固壳形貌模拟研究
4.
Discussion about Calculating Mode of Solidifying-skull's Thickness in Jinan Steel's Slab CCM
济钢板坯铸机凝固壳厚度计算模型的探讨
5.
Study on the Shell Thickness Variation and Liquid Core Position for Bearing Steel Bloom
轴承钢铸坯凝固坯壳厚度变化及液相穴位置测定研究
6.
Molten steel leakage by binding has the defects including disordered vibration mark on outer surface of surviving billet shell, thickness of billet shell gradually getting thinner from up to down and large uneven coefficient of billet shell thickness.
粘结漏钢具有残留坯壳外表面振痕紊乱、壳厚度从上向下逐渐变薄和坯壳厚度不均匀系数大的特点。
7.
A tread depth of less than 1/16 inch is unsafe.
台胎纹厚度低于1/16英寸则不安全。
8.
Slab: rectangular in cross-section, with rounded corners and more than 5cm in thickness.
大板坯--横断面为矩形,圆角,厚度在5cm上。
9.
Development and Application of 330 mm Slab Casting Technology
330mm厚度连铸坯技术的开发与应用
10.
Effect of horizontal stress and rock crack density on roof safety thickness of underground area
水平应力与裂隙密度对顶板安全厚度的影响
11.
With the increasement of material’s density ,the fracture strain trace position ascended and deformation safety region was enlarged.
润滑和增大坯料密度可使断裂应变迹线上移,变形安全区增大。
12.
Determination of waterproof rock pillar height with the top coal caving under sea
海下综放开采防水安全煤岩柱厚度的确定
13.
Analysis of cave roof safe thickness in karst region based on catastrophe theory
基于突变理论的岩溶区路基顶板安全厚度分析
14.
Determination Method of Safety Thickness of Karst Cave Roofs Under Freeway Subgrade
高速公路路基岩溶顶板安全厚度确定方法
15.
Effect of lining thickness lack on lining safety for highway tunnel
公路隧道衬砌厚度不足对衬砌安全性影响
16.
The thickness reduction method in forecasting the critical safety roof thickness of gob area
采空区临界安全顶板预测的厚度折减法
17.
Numerical Simulation for Temperature Distribution of Initial Solidifying Shell with Mold Tube During Bloom Casting of U71Mn Steel
U71Mn大方坯凝固坯壳与结晶器铜管温度场的数值模拟
18.
Study on Curve of Pressure-thickness of MDF Mat and Its Application
中纤板压力-板坯厚度曲线的研究与应用探讨