1.
The Investigation of Microstructure and Properties of Titanium Alloys with Low Elastic Modulus for Biomedical Applications;
生物医用低弹性模量钛合金组织与性能的研究
2.
Studies of Casting Properties of Low Modulus Ti-24Nb-4Zr-7.9Sn Alloy for Dental Application;
低弹性模量Ti-24Nb-4Zr-7.9Sn合金铸造性能的基础研究
3.
New Low Modulus Titanium Alloy Material for Biology Engineer;
生物工程用新型低弹性模量钛合金材料研究
4.
Mechanical Analysis of Titanium Alloy with Low Elastic Modulus for Ceramic-Metal
低弹性模量钛合金用于钛烤瓷的力学分析
5.
Design and Research on Properties of New Type Metastable β Titanium Alloys with Low Elastic Moduli for Biomedical Applications;
生物医用新型低弹性模量亚稳β钛合金的设计及性能研究
6.
least-risk bomb location
危险性最低的炸弹位置
7.
Transient viscoelastic characteristics of NEPE propellant at low temperature
NEPE推进剂低温瞬态的粘弹特性
8.
The influence of pore fluid on rock elastic properties at low saturation is analyzed.
分析了低饱和度时流体对岩石弹性性质的影响.
9.
Research on Anti-cracking of Asphalt Mixtures at Low Temperature and Analysis of Viscoelasticity;
沥青混合料低温抗裂性能研究及粘弹性分析
10.
narrow cotton faric, woven, elastic, containing by weight less than 5% of elastomeric yarn or rubber thread
机织窄幅弹力棉织物,含弹性纱或橡筋线重量低于5%
11.
Dynamic Photoelastic Test with Low Modulus Materials Using High Speed Photography
用高速摄影法进行低弹模材料的动态光弹性试验
12.
Experimental study on the cryogenic two-phase slug flow characteristic in inclined pipes-Liquid slug rising velocity
倾斜管内低温两相弹状流特性实验研究——液弹运动速度
13.
Experimental study on the cryogenic two-phase slug flow characteristic in inclined pipes-Taylor bubble rising velocity
倾斜管内低温两相弹状流特性实验研究——弹状汽泡运动速度
14.
Experimental Study on the Cryogenic Two-Phase Slug Flow Characteristic in a Tube--Taylor Bubble Length Distribution
管内低温两相弹状流特性试验研究——弹状气泡长度分布
15.
Elastic cardo is used to reduce the cost for repair and make install easy.
采用弹性轴节，安装、拆卸方便，维修费用低。
16.
To reduce cholesteral and glycerine,promobe body's metabolize,improve blood vessel elasticity.
促进机体脂类代谢； 增加血管弹性，降低外周阻力；
17.
The sample system belongs among the elastic system whose stiffness and damping is low.
试件系统为低刚度和小阻尼的弹性系统。
18.
Pore deformation of low-permeability gas reservoirs is characteristic of elastic plastic deformation.
低渗透气藏孔隙变形具有弹塑性变形的特征。