1.
Combustion Reaction Welding of TiB_2 Ceramics and Metals;
TiB_2陶瓷与金属的SHS反应焊接
2.
The Technology of Assembling and Welding for the Large "FBR" Reactor Vessel
快速沸水型反应堆容器的组装与焊接
3.
Welding quality control of the primary loop pipe in the 1000 MW nuclear reactor
1000MW核反应堆主回路管道焊接质量控制
4.
The Application of Internal Bore Welding in the Manufacture for the Low Pressure Reaction Water Condenser
内孔焊接在低压反应水冷凝器制造中的应用
5.
Laser Peening Weld Zones and Its Application on Nuclear Reactor
激光冲击处理焊接区在核反应堆上的应用
6.
Stable welding are and high speed feedback duct pilot guarantees the welder with good dynamic response.
焊接电弧稳定，高速的反馈控制回路保证焊机具有良好的动态响应，焊接电弧稳定。
7.
Research on the Properties and the Interfacial Reactions of Sn-Zn-Cu(Ni) Lead-free Solders;
Sn-Zn-Cu（Ni）无铅钎料及其钎焊接头界面反应研究
8.
Tests of the welding properties on 2.25Cr-1Mo-0.25V steel for making hydro-reactor vessels
制造加氢反应器用2.25Cr-1Mo-0.25V钢的焊接性能试验
9.
Research for VAC Synthests Reactor Weld Examination and Manufacture Scheme
醋酸乙烯合成反应器焊接试验与制造工艺
10.
Transient Contact Liquid-Solid Reaction of Solder Droplet/Pad and Interfacial Microstructure Evolution;
钎料熔滴/焊盘瞬间接触液固反应及界面组织演变
11.
Investigation on Elements Inter-diffusion in Reaction Layer During Hip Between Corrosion-resistant Alloy and Carbon Steel
耐蚀合金/碳钢热等静压扩散焊接反应层元素互扩散规律研究
12.
Contact reactive brazing between Al alloy/Cu/stainless steel and analysis on grain boundary penetration behaviors
铝合金/铜/不锈钢接触反应钎焊及晶界渗透行为分析
13.
Study on Mechanism of SiCp/101Al Matrix Composite TIG Welding Joint with Ti Filler In-situ Reinforcement
填充材料Ti原位增强SiCp/101Al基复合材料TIG焊接头反应机理
14.
The Application of the Broken Wire Submerged Arc Weldng in the Infall Trash Screen of the Three Gorges Project
碎焊丝埋弧焊在三峡电站拦污栅焊接上的应用
15.
Engineering Application Research on Welding X70 Spiral Sub-merged Welding Pipe;
X70螺旋焊管焊接的工程应用研究
16.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究
17.
Application of CO_2 Gas Protective Welding to Medium Thickness Plate
CO_2气体保护焊在中厚板焊接中的应用
18.
Application of the twin-wire welding for robot central slot welding
机器人双丝焊在中部槽焊接上的应用