1.
Lineoleum, whether or not cut to shape
列诺伦(亚麻油地毡),不论是否剪切成形
2.
Adiabatic Shear Bands of 4Cr5MoSiV1 Steel Formed by High Speed Cutting
高速切削4Cr5MoSiV1钢形成的绝热剪切带
3.
Experimental Study on Adiabatic Shear Behavior in Chip Formation during Orthogonal Cutting
正交切削切屑形成中绝热剪切行为的实验研究
4.
Experimental study on the forming of shear bands and the local deformation in deep excavation
深基坑中剪切带的形成及局部化变形试验研究
5.
The Forming and Analysing of the Digital Shearing Speckle Correlation Fringe Pattern
数字剪切散斑相关条纹图的形成及其分析
6.
Influence of shear blade failure of shear dies for bar blanks on forging deformation
棒料剪切模刀板失效对锻造成形的影响
7.
Mechanmism of shear band formation and evolution of Al-Zn-Mg-Cu-Sc alloy
Al-Zn-Mg-Cu-Sc合金中剪切带形成与演化机理研究
8.
Influence of drainage condition on formation of shear band in structured soil
排水条件对结构性土中剪切带形成过程的影响
9.
Formation Mechanics of Adiabatic Shear Band for the Different Microstructures of TC6 Alloy
TC6钛合金不同组织绝热剪切带的形成机理
10.
Study on the formation of shear bands in BMGs by "in-situ" compression tests
大块金属玻璃剪切带形成的“原位”压缩实验研究
11.
An by means of a good cutter each rectangular print can be cropped to square.
用一台好的剪切机，每一幅矩形的印刷品都能裁成方形。
12.
The Experimental Research and Numerical Simulation on the Formation of Shear Band of Rock;
岩石变形剪切带形成过程的实验研究及数值模拟
13.
The shear of woven fabrics results largely in the alteration in the angle between warp and weft yarn.
机织物的剪切作用，大部分由经纱和纬纱之间角度的改变所形成。
14.
"In power presses the actual punching, shearing, and forming are done in only a fraction of the operating cycle."
在冲床上,实际的冲压、剪切和成形加工只是工作循环的一部分。
15.
Study on the Shear Band of ShangHai Soft Clay under Plain Strain Condition;
上海软粘土平面应变条件下剪切带形成的试验研究
16.
Shear Induced Interfacial Morphology Development of Polypropylene During over-Injection Molding
二次注射成型聚丙烯中剪切诱导连接界面的形态演变
17.
Influence of process parameters of high shear granulation on the solidification of oily drug vitamin E
高剪切技术工艺参数对维生素E颗粒形成的影响
18.
Thalidomide Inhibits the Atherosclerotic Lesions Induced by Abnormal Shear Stress
沙利度胺抑制异常剪切应力诱导的动脉粥样硬化形成