1.
Convergence devices have two three links entrance, a export, two medium mixed into the third medium.
三通合流阀有两个入口，一个出口，将两种介质混合成第三种介质。
2.
combination restrictive and by pass flow regulator
节流旁通组合式流量调节阀
3.
Three links a triage valves entrance, the two exports, a medium through valves will be divided into two after the road.
三通分流阀有一个入口，两个出口，将一种介质经过阀后分成两路。
4.
Three-way valve has three entrances and pipes, equivalent to two single-Block valves synthetic one.
三通阀有3个出入口与管道相连，相当于两台单座阀合成一体。
5.
Gate valves are normally used for on-off service. They are not recommended for throttling service.
闸阀通常用于启闭应用场合。不适用于节流应用场合。
6.
Gate valves are normally used for on-off service and are not recommended for throttling service.
闸阀通常应用于开启-关闭场合，不能用于节流应用。
7.
Aiming at the disadvantages of present loading system applying proportional relief valve or servo valve, loading system with 3-way proportional pressure reducing valve is proposed.
针对目前采用比例溢流阀和伺服阀加载存在的不足，提出在钢坯修磨机上采用比例三通减压阀加载。
8.
Before installation, check line of flow through valve so that valve will function properly.
安装前，切断通过阀门的流体，以使阀门工作正常。
9.
Also, the valves may be damaged by the high velocity across the seats.
此外，通过阀座的高流量还可能损坏阀门。
10.
The Intelligent Fitting Method for Valve Core Curve Based on Flow Characteristics of Regulating Valve
基于流量特性的调节阀阀芯曲线智能拟合
11.
Circulation and Cooperation of Farm Produces in Economic Circle of Abroad-triangle Zhu;
论“泛珠三角”经济圈的农产品流通合作
12.
triple valve nipple
三通阀与辅助风缸联接短管
13.
Analysis Characteristic of 3 Port Valve-controlled, Single Acting and Asymmetric Cylinder
三通阀控单作用非对称气缸特性分析
14.
Dynamic Simulation Research on Tri-position Four-way Valve based on AMESim
基于AMESim三位四通阀动态仿真研究
15.
This information is then applied to the flow rates on the following chart to determine proper valve size.
然后,根据这些数据结合流量比率在的流量表中选择适当的公称通径的阀门。
16.
Visual Analysis of Tri-dimensional Flow Characteristics of Hydraulic Controlled Check Valve
液控单向阀三维流动特性可视化分析
17.
Series flow control valve, temperature compensated or bypass flow control.
串流流量控制阀、温度补偿控制或旁通流量控制。
18.
The trim valves of the confirming flow test.
应该确认这些阀门通过流量测试。