1.
Comparison of Microstructure and Mechanical Properties of X70 Pipeline Steel Produced by Hot Tandem Mill and Reversing Mill
热连轧与可逆式轧制生产的X70管线钢的组织、性能的对比
2.
Roller is the important tool and is one of expendable parts in rolling.
轧辊是钢铁厂轧制钢板的重要工具,也是轧制生产中的主要消耗备件之一。
3.
Optimization of the Hot Rolling Process for Narrow Strip Steel
热轧窄带钢生产线轧制工艺改造综述
4.
Cause of producing the waves during 1350 roughing mill rolling aluminium foil and the controlling methods
1350粗轧机轧制铝箔产生波浪的原因及控制方法
5.
The practice of splitting rolling of continuous bar rolling line
全连续小型棒材轧机生产线切分轧制实践
6.
Researching the Technics of Pickling-CC Rolling & the Optimization Design of Rolling Regulation;
酸洗—冷连轧生产工艺的研究及轧制规程的优化
7.
Applying Ferrite Rolling Technology to Producing Ultra-Thin Hot-Rolling Strip Steel
采用铁素体轧制技术生产超薄热轧带钢
8.
PRODUCTION PRACTICE OF ENHANCING EQUILIBRIUM RATIO OF THE MINUS-DEVIATION ROLLING IN THE HOT ROLLED ANGLE
提高热轧角钢负偏差轧制均衡率的生产实践
9.
Reduction Pass Rolling in TM Finishing Mill Train of Laiwu Steel's Large H-beam Product Line
莱钢大H型钢生产线TM精轧机组减道次轧制
10.
according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.
根据轧制轧材的温度，轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。
11.
Study on Producing Stability and Optimizing of Rolling Machinery in Stainless Steel Cold Rolling Factory of Taiyuan Iron and Steel Group Co.Ltd;
太钢不锈冷轧厂轧制机组稳态生产和生产优化分析研究
12.
Development of the PP spunlaid and thermal-bonded line with a width of 5.1 meters
幅宽5.1米丙纶纺粘热轧生产线的研制
13.
Production Controlling Method during Hot-rolling of Super-pure Ferritic Stainless Steel
超纯铁素体不锈钢热轧生产控制方法
14.
Trial Production of GCr15 Bearing Steel by Means of Converter Plus Continuous Casting-Hot Rolling Process
转炉连铸—连轧生产GCr15轴承钢的试制
15.
ELC Steel Production by Ferritic Hot Rolling Process
应用铁素体区轧制工艺生产ELC钢
16.
Research and Development of St37-2 Hot-rolled Strip Production Technology
St37-2热轧带钢生产技术研制开发
17.
Trial Production of 32Cr3Mo1V Steel As-cast Roll Bush
32Cr3Mo1V钢铸轧辊套的生产试制
18.
Control of Surface Quality of Cold Rolled and Hot Dip Galvanized Strip From Hot Strip Produced by CSP
CSP热卷生产冷轧镀锌产品表面质量控制