1.
Experimental results indicate that pulse current causes denser deposit, which leads to the decrease of EDM tool wear ratio.
当电铸层作为电火花加工电极时，脉冲电流电铸可以降低电极损耗率。
2.
full-excitation plate dissipation
全激励板极功率损耗
3.
Online Efficiency Optimization of Stator-doubly-fed Doubly Salient Motor Based on Loss Modle
基于损耗模型的定子双馈电双凸极电机在线效率优化实验研究
4.
Analysis and solution:Loss of high power spot welding machine
大功率点焊电源损耗分析及解决方案
5.
In this paper a new method which improves not only electrical field distribution in film layers to decrease losses but also ensures good optical reflectivity was presented.
设计极高反射率光学薄膜必须考虑薄膜内电场强度分布对光损耗的影响。
6.
In-line Compensation Research of Electronic Pole Loss in EDMMILL to TA4
电火花铣削钛合金电极损耗在线补偿研究
7.
Study on Electrode Wear Prediction Technology of ED Layered Milling;
电火花分层铣削加工电极损耗预测技术的研究
8.
EDM Electrode Wear Mechanism and Control Research
电火花加工中的电极损耗机理及控制研究
9.
Study of Tool Electrode Loss and Compensation Methods in Short Arc Machining
短电弧加工工具电极损耗及补偿方法研究
10.
Research on Tool Wear Compensation in Micro-EDM
微细电火花加工中的电极损耗补偿研究
11.
Study on Mechanism of Electrode Wear in Micro-EDM
微细电火花加工中电极损耗机理的研究
12.
Wear-resist Electrodes for Micro-EDM
一种微细电火花加工用耐损耗电极(英文)
13.
Extremum Problem in the Wheatstone Bridge Circuit
惠斯通电桥电路中耗散功率的极值问题
14.
A much smaller power loss occurs in the cable when energy is transmitted at high voltage.
用高压输送电能时，沿输电线的功率损耗小得多。
15.
Having the excellent electrical performances, low losses and a capacitance of a slight variation with both temperature and frequency.
电性能优良，损耗小，电容量随温度和频率变化小。
16.
Optimal Power Distribution Method with Minimized Loss of the West-to-East Transmission Lines
西电东送输电通道损耗最小最优功率分配方法
17.
A timer can set the charging period to prevent the carbon stacking and the wear of electrode.
电极与工作物放电时之时间设定功能，可防积碳及防电极损耗。
18.
Optimization of Parasitic Capacitance to Reduce the MOSFET Switching Loss;
减小MOSFET开关损耗的极间电容优化仿真研究