1.
Conclusion: The CCBT is apparently better than the normal casting extra-coronal retainer within RPD, both in aesthetics, manufacture and comfort.
结论：铸造牙间卡在美观、制作和异物感等方面明显优于常规铸造冠外固位体。
2.
Conclusion The static friction coefficient between the cast Co-Cr alloy clasp and the enamel of human tooth varies within a small range.
结论 常规制作的钴铬合金铸造卡环与牙釉面间的静摩擦系数值变异较小。
3.
The skill or operation of founding.
铸造术，铸造铸造，铸造的技术
4.
The metals most frequently cast are iron, steal, aluminum and so on.
最常用来铸造的金属是铁、钢、铝等。
5.
Code for construction and acceptance of casting equipment installation engineering
铸造设备安装工程施工及验收规范
6.
Hot-top Casting of Large-scale 5052 Aluminum Slabs
5052铝合金大规格扁锭热顶铸造实践
7.
Revamping practice on horizontal continuous casting for ф180mm round blank in Hengyang Steel
衡钢ф180mm水平连铸圆管坯扩规改造实践
8.
Burr defect often appears on the surface of investment casting and it is the main reason causing inferior produces.
熔模铸造中经常出现毛刺缺陷,是造成铸件次品的重要原因。
9.
Depending on local conditions, the following are typical requirements for the casting department.
根据具体情况，铸造车间通常所需的条件如下。
10.
Common Defects of Styrofoam Patterns for EPC Process and Prevention Methods
消失模铸造用发泡模常见的缺陷及防止方法
11.
Research on Common Defects of Low-pressure Expendable Pattern Casting Process for Magnesium Alloy
镁合金真空低压消失模铸造常见缺陷分析
12.
RULE OF SEGREGATION OF ALLOYING ELEMENTS IN CAST Ni-BASE SUPERALLOYS
镍基铸造高温合金中合金元素的偏析规律
13.
Spraying sand for jewelry casting could also be supplied with different specifications and types.
本公司还生产首饰铸造用各种规格、型号的喷砂。
14.
The Behavior of Forging Technology and Compression Deformation of Casting ZK60 Magnesium Alloy;
铸态ZK60镁合金锻造及压缩变形规律的研究
15.
Study on Microflow of Liquid Metal in Micro Casting Forming;
微铸造成形过程液态金属微流动规律研究
16.
Formation and Evolution of Defect during the Vertical Centrifugal Casting of Titanium Alloy
钛合金立式离心铸造缺陷形成与演化规律
17.
Gas Bubble Growth in Vertical Centrifugal Casting Liquid Metal
立式离心铸造液态金属中气泡的长大规律
18.
Mechanical Properties of Centrifugal Casting Titanium Alloys
离心铸造钛合金件的力学性能变化规律