1.
Investigation on Fatigue Notch Factor for Medium Carbon Steel under Axial Loading
轴向加载条件下中碳钢疲劳缺口系数的研究
2.
Structural Analysis of Induction Power Magnetic Bearing and Design of Axial Loading Platform
感应型动力磁轴承结构分析及轴向加载实验平台设计
3.
Investigation on Extra-Low Cycle Fatigue Fracture Design for Middle Carbon Steel under Axial Loading;
轴向加载条件下中碳钢的超低周疲劳断裂设计研究
4.
However, the interparticle friction did not appear to have a significant effect on the magnitude of the lateral stress developed during the uniaxial compression.
然而，颗粒间的摩擦对轴向加载时系统产生的水平应力没有很强的影响。
5.
Warm Extrusion Forming Technology with Multi-direction Load and Die Design for Abnormal-axes
异形轴多向加载温挤压成形工艺及模具设计
6.
Ultimate Strength of Stiffened Plates with a Square Opening Under Axial and Out-of-Plane Loads
轴向荷载与面外荷载作用下带方形开口加肋钢板的极限强度
7.
Use of Axial Partial Loading Test for Evaluating the Rut Resistance of Asphalt Mixture
采用轴向局部加载试验评价沥青混合料高温性能研究
8.
axial betatron oscilations
轴向电子感应加速岂荡
9.
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。
10.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
11.
The Research on Equal-strength Design of Large-scale Heavy-load Cross-shaft Universal Clutch
大型重载十字轴式万向联轴器等强度设计研究
12.
Design and Optimization of Double-Axes Turning Machenism on Heavy Vehicles;
重载汽车双轴转向系统的设计与优化
13.
Numerical investigation on interaction of axial and lateral response for super-long pile
轴-横向荷载作用下超长桩数值模拟
14.
Constitutive Description of Tin-Lead Solder 63Sn-37Pb under Multiaxial Loading;
多轴加载下焊锡钎料63Sn-37Pb的本构描述
15.
Buckling capacity optimization of cylindrical shell with rectangle stiffeners under uniform axial compression
矩形加筋圆柱壳轴压屈曲承载力优化
16.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
17.
Finite element analysis of PVC coated biaxial warp knitted fabric under multiaxial loads
多向载荷下PVC双轴向经编织物有限元分析
18.
Finite element simulation of PVC coated biaxial warp knitted fabric under biaxial loads
双向载荷下PVC涂层双轴向经编织物有限元分析