1.
THE APPLICATION OF ELECTRIC CONDUCTING CROSS ARM ON FERROALLOY REFINING FURNACE
导电横臂在铁合金精炼电炉上的应用
2.
RAPID MELTING IN ELECTRIC ARC FURNACE AND VACUUM REFINING OF SPECIAL STEELS
特殊钢的电弧炉快速冶炼和真空精炼
3.
LF Refining Furnace Electrodes Intelligent Control Research and Implementation;
LF精炼炉电极智能控制的研究及实现
4.
The Necessity of Refining the Molten Steel of Converter and EAF with Medium-Frequency Induction Electric Furnace
采用中频感应电炉精炼转炉、电弧炉钢液的必要性
5.
Smelting Low-grade Niobium Concentrate of Baotou by Two-step Arc-furnace Method: Energy Equilibrium
电弧炉两步法冶炼包头低品位铌精矿能量平衡
6.
Research on the Method and System of Electrode Control for AC Ladle Furnace;
交流钢包精炼炉电极控制方法及系统研究
7.
Study on the slag constitution about the tin concentrate containing high W and AI reduced-smelting by EF
高钨高铝型锡精矿电炉还原熔炼渣型的研究
8.
The electric arc steelmaking process may be divided into the following four stages: charging, melting, refining and tapping.
电弧炉炼钢可以分为以下4个阶段:装料，熔化，精炼和出钢。
9.
The Research on Strengthen Reduction during LF Refining Process and EAF Flow Rhythm
LF炉精炼过程强化还原与电炉流程节奏工艺研究
10.
Practice of improving 10t refiner magnesium fining reclaiming efficiency
提高10吨精炼炉熔炼外购镁精炼回收率的实践
11.
EAF Steelmaking Electrical Operation and Development of EAF Technologies
电炉炼钢电气运行与电炉技术的发展
12.
Practice of Copper Refining with Shaft Furnace-Reverberatory Furnace
竖炉——反射炉联合铜精炼工艺实践
13.
Process Practice of Combined Copper Refining with Shaft Furnace-reverberatory Furnace(Cound.)
竖炉—反射炉联合铜精炼工艺实践(续)
14.
Experimental Study on Foaming Slag for Steel Refining and Physical and Mathematical Simulation of LF Process;
LF泡沫精炼渣研究及钢包精炼炉数理模拟
15.
electric furnace for manufacturing, refining or smelting metals
电炉,制造、提炼或熔炼金属用
16.
INVESTIGATION ON TEMPERATURE DISTRIBUTION IN ELECTRIC ARC FURNACE
炼钢电弧炉炉内温度分布规律的研究
17.
Remaking the Electric Furnace with Applying the Technique of Tapping from Eccentric Furnace Bottom;
采用偏心炉底出钢技术改造炼钢电炉
18.
Heat Recovery Boiler Design in Electric Stove Waste Heat Utilization
炼钢电炉余热利用及余热锅炉的设计