1.
FINITE ELEMENT METHOD SOLOVING THE DYNAMIC RESPONSE OF CANTILEVER AGI- TATION SHAFTTHE FIRST PART: THE EMULATON CALCULATION OF DYNAMIC RESPONSE
有限元法求解悬臂搅拌轴动力响应 第一部分:动力响应的仿真计算
2.
Method for determining numbers of mixing arm and area of mixing blade in mixer
搅拌机搅拌臂数目与叶片面积的确定方法
3.
Fatigue Analysis of the New Stirring Kneader Shafts Based on the Finite Element Method
基于有限元法的搅拌捏合机搅拌轴疲劳分析
4.
Study of axial flow velocity in axially stirred tank
轴流桨搅拌槽内轴向流动速度的研究
5.
Oil and Gas Suspension System of Underground Concrete Mixing Truck
井下混凝土搅拌输送车油气悬挂系统
6.
double-horizontal-shaft forced type concrete mixer
强制式双卧轴混凝土搅拌机
7.
Analysis and harness of axle sealing failure in store jar with side stir
贮罐侧入式搅拌轴封失效分析及治理
8.
Comparison of Approximate Calculating Method for Critical Rotating Speed of Stirring Shaft
搅拌轴临界转速近似计算方法的比较
9.
Effects of Agitation Speed on the Average Diameter of PVC Suspension Resin
搅拌转速对悬浮PVC树脂平均粒径的影响
10.
CFD simulation of solid-liquid suspension characteristics in stirred tank reactor
搅拌式反应器内固-液两相悬浮特性的CFD模拟
11.
RESEARCH OF SOLIDS SUSPENSION IN LARGE-SCALE MECHANICAL FLOTATION CELL
大型机械搅拌式浮选机槽内固体悬浮的研究
12.
To stir or shape(material) with a paddle.
搅拌用木板搅拌或定形
13.
Corroding and Wearing of Slide Bearing in Agitator for Storage Tank ?and the Relevant Counter Measurement
浆池搅拌器滑动轴承的腐蚀、磨损及其对策
14.
Axial flow type.A standard agitator in low viscosity. The cycling speed is high.
轴流型，循环速率高，低粘度操作的表混搅拌器。
15.
Reasons and reformation of vulnerability of agitator driving shaft of final polycondensation reactor
终聚釜搅拌器传动轴损坏的原因及改造
16.
Investigation on the Solutions to Mechanical Seal Leakage of Side Cantalever Agitator by Magnetic Driver
应用磁传动解决侧伸式搅拌器轴封泄漏的研究
17.
Construction of Multiple Deep-Layer Mixed Seep-preventing Wall in Thick Medium Coarse Sand Bed;
厚中粗砂层中多轴深层搅拌防渗墙的施工
18.
Contact Fea of Crown Gear Couplings in Stirring Machine
搅拌机用鼓形齿联轴器的全齿有限元接触分析