1.
Production and Study of Bright N-6 16.7 dtex/5f Drawn Yarn
普通加弹机开发生产有光牵伸丝的工艺设备探讨
2.
A Material Analysis of the Uneven Dyeing of Draft Compound Silk Fabrics of Polyester Fiber;
涤纶牵伸复合丝织物染色不匀的原料分析
3.
Development and Application of Low Roughness Stretching Roller Used for High Strength Nylon66 Fine Filament Yarn
尼龙66低旦丝用细面牵伸辊的开发和应用
4.
Effects of drawing technology on the properties of PTT/PET bi-component filaments
牵伸工艺对PTT/PET复合长丝性能的影响(英文)
5.
Effect of polyurethane filament draft ratio on elastic fabric performance
氨纶丝预牵伸倍数对弹力织物性能的影响
6.
The process of drawing irreversibly stretches the spun filaments and winds up the stretched yarn. The strength and recoverable extensibility are thereby increased.
在牵伸过程中连续拉伸长丝,并将其卷绕起来,长丝的强度和弹性会因此而提高。
7.
Drawing machine under pressurized steam is key equipment for preparation high quatity PAN precursors.
加压水蒸汽牵伸机是制取高性能碳纤维原丝的关键设备。
8.
"Spinning is the process of drawing out and twisting a mass of cleaned, prepared fibres. Filament yarns generally require less twist than do staple yarns."
纺纱是对纤维集合体牵伸加捻的过程。长丝比短纤维需要的捻度少。
9.
The conversion of nylon chips into fiber comprises two distinct processes: spinning and drawing.
从尼龙切片到纤维的转化包括两个不同的过程：纺丝和牵伸。
10.
Characterization on the Structure and Mechanical Properties of Polyacrylonitrile Precursors on Different Draw Stages;
不同牵伸倍数聚丙烯腈原丝的结构表征及其力学性能研究
11.
Development of technology and instrument about producing PET filament used for sewing threadⅢResearch on manufacturing technology of PET filament used for sewing thread
多级牵伸缝纫线用长丝技术及设备开发 Ⅲ缝纫线用涤纶长丝生产工艺的研究
12.
Development of technology and instrument about producing PET filament used for sewing threadⅡDesign of technology process and section of raw material
多级牵伸缝纫线用长丝技术及设备开发 Ⅱ.工艺路线设计及原料筛选
13.
Bardenheuer's extension
巴登霍伊厄氏牵伸术
14.
pin drafter
针梳牵伸机, 针梳机
15.
Modern controlled drafting systems use drafts of the order of 30.
新式的牵伸控制系统使用大约30倍牵伸。
16.
The effect of different drawing condition and way on structure of PAN precursor
牵伸条件以及牵伸方式对PAN纤维结构的影响
17.
Process Analysis about the Additional Pressure Bar in the Drafting Zone on the Spinning Frame
细纱机牵伸区附加压力棒牵伸工艺分析
18.
Influence of Back Zone Drafting Multiple on Pressure Bar Drafting in Spinning Front Zone
后区牵伸倍数对细纱前区压力棒牵伸的影响