1.
The article introduced the principle& characteristic of Plasma Powder Welding and analyzed the superiority& advantage of the application of the technology on manufacturing sealing components of valve.
介绍了等离子粉末喷焊技术的原理、点以及在阀门密封面制造中应用的优越性及经济性效益分析。
2.
Study of Wear-resisting Mechanism and Plasma Arc Surfacing of Ni-based Alloy Powder;
镍基合金粉末等离子弧堆焊及耐磨机理的研究
3.
Study on Plasma Torch and Wear-Resistant Alloys by Pta Powder Surfacing;
粉末等离子弧堆焊枪体及耐磨合金的研究
4.
Properties of APS alumina coating with different alumina particle distributions as feedstock
不同氧化铝粉末等离子喷涂氧化铝涂层的性能
5.
Numerical Simulation of Nanostructured Agglomerated Powder Melting Process during Plasma Spraying
等离子喷涂纳米团聚体粉末熔化过程数值模拟
6.
Research on Properties of Titanium Dioxide Nanopowders Doped with Metal Ion Prepared by Plasma Spray;
等离子喷涂法制备金属离子掺杂二氧化钛纳米粉末的性能研究
7.
In the second part, the preliminary experience of plasma powder overlaying work with valve sealing surface is introduced.
第二部份介绍阀门密封面等离子粉末堆焊工作的初步经验。
8.
This report describes the structure and the main behavior of a surfacing torch with reverse polarity soft plasma arc and uses alloy powder.
本文介绍了反极性弱等离子弧粉末堆焊枪的结构及其主要特征。
9.
Study on the Application of Plasma Arc Powder Repair Welding in Restoring Petroleum Drill Stem Joint;
等离子弧粉末堆焊在石油钻杆接头修复中的应用研究
10.
The practice indicates that the service time of bimetals barrel is above three times higher than that of nitrogen hardening one.
生产应用证明：粉末等离子弧喷焊制造的双金属耐磨机筒的使用寿命高出氮化处理件寿命三倍以上。
11.
Study and Design of Digital Plasma Spray Welding Power Source;
数字式等离子喷焊电源的研究与设计
12.
Study on Plasma Spray Welding of Ni-Based Alloy WC Composite Coatings
等离子喷焊镍基合金碳化钨复合涂层
13.
Preparation and performance analysis on wear-resistance coating of plasma spray welding
等离子喷焊耐磨涂层制备及性能分析
14.
Microstructure Forming Mechanism of Cermet Coatings Prepared by Reactive Plasma Spraying of Fe-Ti-C Powders
反应等离子喷涂Fe-Ti-C复合粉末制备金属陶瓷涂层的组织形成机理
15.
Powder flame spray and spray fusig gun,with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder.
粉末火焰喷涂喷焊设备，配有各种粉末喷嘴，能喷涂金属微细粉末和氧化物涂层。
16.
Fatigue Properties Improvement of Welded Structures by Plasma Spray Process;
改善焊接结构疲劳性能的等离子喷涂法研究
17.
Development of Phase Shift Inverting Power of the Plasma Spray Welding Equipment;
等离子喷焊设备移相式逆变电源的研制
18.
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;