1.
Analysis on worn morphology of middle and low chromium grinding balls used in wet mill
湿式磨机中低铬铸铁磨球的磨损形貌分析
2.
Analyses of the Chips of High-Cr Iron Worn off under Abrasive Wear Conditions
高铬铸铁在磨粒磨损工况的磨屑形貌分析
3.
Study on the relationship between microtopography of brazed diamond and the abrasion of grinding grains
钎焊金刚石微观形貌与磨粒磨损状态关系研究
4.
Analysis on Electrical Sliding Wear Morphology of Cu-base Powder Metallurgy
铜基粉末冶金载流摩擦磨损微观形貌分析
5.
Analysis of Electric Sliding Wear Morphology of Al_2O_3/Cu Composites
Al_2O_3/Cu复合材料电滑动磨损微观形貌分析
6.
Characteristics and Tribological Properties of MoS_2-Zr Composite Coatings Deposited by Medium-frequency Magnetron Sputtering and Arc Ion Plating
MoS_2-Zr复合涂层形貌、结构及摩擦磨损性能研究
7.
Influence of Rolling on the Morphology and Wear Property of Ni Electro–brush Plated Coating
滚压处理对镍刷镀层表面形貌及磨损性能的影响
8.
Microstructure and wear properties of spray formed Zn-38Al-2Cu alloy
喷射沉积Zn-38Al-2Cu合金微观形貌和摩擦磨损性能研究
9.
Wear-Friction Properties and Microstructure of Zn52Al40Cu2Si6 Alloy Prepared by Spray Deposition
喷射成形Zn52Al40Cu2Si6微观形貌及耐磨性能
10.
THE INFLUENCE OF HIGH ENERGY BALL MILLING ON THE MORPHOLOGY AND COMPOSITION OF FERRIC OXIDE POWDER
高能球磨对Fe_2O_3粉末形貌和成分的影响
11.
The study indicates that main types of damage to the coupler are adhesive damage and abrasion damage.
研究表明,车钩磨损的主要形式是粘着磨损以及伴随粘着磨损而产生的磨粒磨损。
12.
The Study on Formation Process of Three Kinds of the Typical Abrasive Debris
三种典型磨粒磨损磨屑形成过程的研究
13.
Micro-mechanism and Control of Elastic-plastic Contact and Wear for Extrusion Forming Process;
挤压成形弹—塑性接触磨损微观机理及磨损控制
14.
Study on the Preparation of Laser Textured Morphology and Its Wear-resiatance of Drawing Die
拉深模激光毛化形貌制备及其耐磨性能研究
15.
Influence of milling medium on the morphology of α-Al_2O_3 synthesized from Al(OH)_3 in molten salt
球磨介质对熔盐合成α-Al_2O_3粉体形貌的影响(英文)
16.
Effect of Grain Size of Grinding Wheel on Surface Topography
砂轮粒径对磨削后Si片表面形貌的影响
17.
Research on the 3-D Detection and Areal Characterization of Micro-topography of Lapping Surface
研磨表面微观形貌的三维检测及Areal表征
18.
Research on the influence of heat source shape on the ultra-precision grinding thermal model
热源形貌对超精密磨削热模型影响的研究