1.
rubber sealing ring for medical sterite cooker
医用消毒锅橡胶密封圈
2.
rubber sealing ring for pressure cooker
日用压力锅橡胶密封圈
3.
Effects of Dimensional Tolerance on Sealing Characteristic of O-ring;
O形橡胶密封圈尺寸公差对密封性能的影响
4.
Finite Element Analysis on Rubber Sealing Y-ring in the Condition of Static Seal
静密封条件下Y形橡胶密封圈有限元分析
5.
Test methods for rubber O rings
GB/T5720-1993O形橡胶密封圈试验方法
6.
Appearance quality for reciprocating rubber seals
GB/T15325-1994往复运动橡胶密封圈外观质量
7.
Finite Element Analysis of Stress and Contact Pressure of Rubber O-sealing Ring with Back-up Ring
O形橡胶密封圈配合挡圈密封的应力与接触压力有限元分析
8.
Reciprocating rubber seals-Design criteria for standard applications-Part 3: rubber seals for wipers
GB/T10708.3-1989往复运动橡胶密封圈结构尺寸系列第三部分:橡胶防尘密封圈
9.
Appearance quality acceptance criteria for rubber O-rings
GB/T3452.2-1987O形橡胶密封圈外观质量检验标准
10.
The Non-linear Contact Finite Element Analysis of the Mouth Shaped Rubber Sealing Ring
唇形橡胶密封圈非线性接触有限元分析
11.
Study on Effects of Biodiesel on Swelling Performance of Rubber Sealing Collar
生物柴油对橡胶密封圈溶胀性能的影响研究
12.
The Application of Finite Element Method in the Design of Rubber Sealing Y_X-ring
有限元分析法在Y_X形橡胶密封圈设计中的应用
13.
Research on Storage Life of Silicon Rubber O-ring in Different Temperature and Humidity Condition
不同温、湿度条件下硅橡胶密封圈贮存寿命研究
14.
" Fluid systems--Sealing devices--O-rings--Inside diameters, cross-sections, tolerances and size identification code"
GB3452.1-1992液压气动用O形橡胶密封圈尺寸系列及公差
15.
Fluid power systems--O-ring--Design criteria for O-ring housing--Basic calculation
GB/T3452.3-1988液压气动用O形橡胶密封圈沟漕尺寸和设计计算
16.
Simplified two-dimension finite element model was established for the hollow rubber seal of hood-type annealing furnace.
建立了罩式退火炉空心橡胶密封圈的二维简化有限元模型;
17.
Improvement on Rubber Seal Ring of Plastic Bottle-blower Based on Finite Element Method
基于有限元分析的PET吹瓶机橡胶密封圈的改进设计
18.
Medium or High-pressure Seal Design of SrO·6Fe_2O_3 MNBR
SrO·6Fe_2O_3磁性丁腈橡胶中高压密封圈设计