1.
Slab: rectangular in cross-section, with rounded corners and more than 5cm in thickness.
大板坯--横断面为矩形，圆角，厚度在5cm上。
2.
Reason Analysis of Breakout by Sticking for Slab CCM in Jigang
济钢大板坯连铸机粘结漏钢原因分析
3.
Study on Temperature Changing Regularity of Slab in CC-HR Region
连铸-热轧区段大板坯温度变化规律研究
4.
Study on numerical simulation for heat transfer of slab during hot transfering and hot charging
热送热装过程大板坯传热数值模拟研究
5.
The Application and Investigate of the Moldexpert System in the CCM
基于结晶器专家模型控制系统的大板坯连铸机
6.
Project construct & production practice of straight arc slab CCM at No.3 Steel-making Plant of Jigang
济钢三炼钢直弧型大板坯连铸机的工程建设与生产实践
7.
Reason Analysis and Countermeasures of Influencing the Service Life of Slab CCM Segment
影响大板坯连铸机扇形段寿命的原因分析及对策
8.
THE ANALYSIS AND COUNTERMEASURES OF FREQUENT DAMAGE OF VAI SLAB CASTER HORIZONTAL SEGMENTS
VAI大板坯连铸机水平段频繁损坏分析及改造措施
9.
Installation Technology of Hoisting the Ladle Rotary Equipment of 2150 Continuous Slab Caster
2150板坯连铸机大包回转设备安装技术
10.
A Study on Internal-mat Conditions During Hot-pressing Process of Flakeboard;
大片刨花板热压过程中板坯内部环境变化研究
11.
Gas pressure in mat during hot-pressing process of flakeboard.
大片刨花板热压板坯内部气压变化的研究
12.
Modelling of Fluid Flow and Centerline Segregation in Continuous Thin Slab Casting With LES Method
薄板坯连铸流场与中心偏析的大涡模拟
13.
Research on the Abnormal Vibration and Fault Monitoring for Heavy Thin-Slab Hot Rolling Mill;
大型薄板坯热连轧机异常振动与故障监测研究
14.
Application and Research of Liquid Core Reduction Technology in Slab Continuous Casting of SGJT
液芯大压下量技术在板坯连铸中的应用与研究
15.
continuous sheet-bar and billet mill
连续式薄板坯和钢坯轧机
16.
Effect of roll gap shrinkage optimization on slab quality
板坯辊缝收缩优化对铸坯质量的影响
17.
Analysis on Causes of Slab Stagnating in CC and Their Improvement Measures
板坯连铸“滞坯”原因分析及改进措施
18.
The temperature behavior within the Poplar flake-board mat during steam injection vacuum pressing( SIVP) was studied.
研究了喷蒸真空热压杨木大片刨花板坯内部的温度分布特征。