1.
The Statistical Distribution of Bolt-Hole Clearance in Bolt Joints;
螺栓连接件中栓孔间隙分布规律的研究
2.
EXPERIMENTAL STUDY ON ANTI-SLIDING COEFFICIENT OF FRICTION TYPE HIGH-STRENGTH BOLT CONNECTORS
摩擦型高强度螺栓连接件抗滑移系数试验研究
3.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
4.
double-studded flange
双头螺栓连接的法兰
5.
boiler band joining eye bolt
锅炉带圈连接眼螺栓
6.
studded-flange connection
带柱螺栓的法兰连接
7.
Bolted joints can be readily disassembled and reassembled; hence Bolts or screw fasteners are used more than other types of mechanical fastener.
螺栓连接易于装、拆;因此,螺栓或螺纹件紧固件较其它机械扣件用得更广。
8.
"Bolt: Mechanical fastener, usually used with a nut, for connecting two or more parts."
螺栓:通常与螺母一起用于连接两个或更多零件的机械紧固件。
9.
Frame of front-wheel double-drum component: It is of formed steel welding structure，which is connected with main frame by bolts.
前轮双转鼓组件框架：型钢焊接结构，通过螺栓与主框架连接。
10.
Note- threads connecting to microscope are male.
注意：连接显微镜的螺栓是外螺纹。
11.
Component installation of nodes connected by bolts or welding required inspection Connections after passing before welding or fastening.
构件安装采用焊接或螺栓连接的节点,需检查连接节点,合格后方能进行焊接或紧固.
12.
glass-reinforced thermosetting plastics (grp) pipes and fittings-test method to prove the design of bolted flange joints
玻璃增强热固塑料(GRP)管和配件-螺栓法兰连接的设计查验试验方法
13.
Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T3633-1995钢结构用扭剪型高强度螺栓连接副技术条件
14.
"When bolting to steel flanges, longer bolts or stud may be required."
当用螺栓与钢法兰连接时,可能需要更长的螺栓或螺杆。
15.
Install the bolts attaching the end cap to the front fender.
安装连接末端端盖到前挡泥板的螺栓。
16.
The cross girder center segments of the bents were field bolted.
构架横梁的中间段在工地用螺栓连接。
17.
Analysis of pivot bolt breaking for water gate of Xinqiao ship lock
新桥船闸闸门支铰连接螺栓断裂分析
18.
The Replace and Quality Supervision for the Bolt of the Steel Rigid Frame Node;
钢架节点连接螺栓的代换及质量监督