1.
Effects of Bi and Ti Addition on Microstructure and Properties of Gray Cast Iron Joint by Flame Welding
Bi、Ti复合添加对灰铸铁焊补区组织与性能的影响
2.
Ceramic Cushion of Steel Pipe Weld Aided Device and Its Welding Procedure
钢管焊缝陶瓷垫补焊装置及焊接工艺
3.
welded reinforcement of nozzle opening
接管开孔的焊接补强
4.
Study on the Welding Wire Used in Repairing ZL205A Alloy Castings;
ZL205A铝合金铸件焊补用焊丝的研究
5.
Study on High Efficient Bonding and Repaired Welding Process of TA15 Titanium Alloy;
TA15钛合金高效焊接及补焊工艺研究
6.
CO_2+O_2 Mixed GMAW Welding Gray Cast Iron
CO_2+O_2混合气体保护焊补焊灰铸铁
7.
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
8.
Analysis and Patching for Cracks which Appeared after the 2000m~3 Spherical Tank Assembling Weld
2000m~3球罐组焊裂纹分析与修补
9.
Real-time Interpolation Algorithm for Trajectory Planning Based on Welding Robot
基于焊接机器人的实时轨迹插补算法
10.
Welding Process for 2A12-T4 of Aluminum Alloy
铝合金2A12-T4壳体零件补焊工艺
11.
5CrNiMo Die Forging Welding Technology
5CrNiMo锤锻模具补焊工艺方法
12.
Specially suitable for zinc patching of weld seam in tube welding line, and capacitor spray.
本套设备适合于高频焊管生产线上进行焊缝的补锌及电容喷涂。
13.
Automatic offset function for long cable up to 100m.
具有焊线长的自动补偿功能，焊接电缆可长至100米.
14.
Residual stress analysis of repair welding at different zone of Q345R welded joint based on finite element simulation
Q345R钢焊接接头不同部位补焊残余应力的有限元分析
15.
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
16.
Numerical Simulation of the Effects of Welding Processes on Temperature Field of GMAW Surfacing Weld Zone
焊接工艺对GMAW堆焊焊缝区温度场影响的数值模拟
17.
The Research of Auto Adjustor System of Coaxiality and Automatic Control System of Heat Treatment for Producing Drilling Pipes;
钻杆对焊自动找正及焊区热处理监控系统研究
18.
Simulation of the microstructure evolution of welding-grain growth in heat affected zone
焊接过程组织演变——模拟焊接热影响区晶粒长大