1.
ANALYSIS ON THE REGULATION OF STRESS CRACK DISTRIBUTION OF RFCC REGENERATOR
重油催化再生器应力腐蚀裂纹分布规律分析
2.
reduced catalyst receiver
再生催化剂的接受器
3.
Regeneration and effect analysis of semi-regeneration catalytic reforming catalyst
半再生催化重整催化剂器外再生与效果分析
4.
catalyst regeneratio
催化剂再生[作用]
5.
MARGIN ANALYSIS OF FCCU REGENERATOR BASED ON DYNAMIC MODEL
基于动态模型的催化裂化装置再生器裕量分析
6.
Analysis on Coke Burning Effect of Regenerator in FCCU and the Improvement Measures
催化裂化装置再生器烧焦效果分析及改进措施
7.
Catalyst returning to the reactor may not be completely regenerated because of insufficient time in the regenerator.
因为催化剂在再生器中停留时间不足，故返回反应器的催化剂可能未被完全再生。
8.
Each reactor is taken off stream in turn for regeneration.
轮流切断各个反应器的蒸气进行催化剂再生。
9.
Soft measurement system of oxygen content of continuous catalytic reforming regenerator is developed.
开发了连续催化重整再生器氧含量软测量系统。
10.
Using Fuel Additive for Regeneration of Diesel Particulate Trap
柴油机微粒捕集器燃油添加剂催化再生研究
11.
Regeneration of RN-22 hydrorefining catalyst out-of-reactor and its industrial application
RN-22加氢精制催化剂的器外再生及工业应用
12.
Study on DPF Regeneration Performance of Rear Injection Catalysis
颗粒捕集器后喷油催化再生性能的研究
13.
regeneration gas
(再生催化剂所产生的)再生气体
14.
A METHOD OF HYDRODYNAMICS CALCULATION FOR FCC UNIT REGENERATOR HEAT REMOVAL SYSTEM WITH NATURAL WATER CIRCULATION
催化裂化再生器自然水循环外取热系统水动力计算方法
15.
The Stress Corrosion Cracking of the Regenerator in Fluid Catalytic Cracking--the Controlling of Stress Factors in Equipment Manufacturing;
催化裂化再生器应力腐蚀裂纹“应力因素”在设备制造中的控制
16.
The Activity Determination of Pt/Al 2O 3 COPromoted Catalyst Used in Regenerator of Catalytic Cracking(Ⅱ) -- The Determination and Simulation of Equilibrium Activity
催化裂化再生器中铂助燃剂催化活性的测定(Ⅱ)——助燃剂的平衡活性及其模拟
17.
Progress in the nitrogen chemistry during the regeneration of fluid catalytic cracking catalyst
催化裂化催化剂再生过程中的氮化学进展
18.
Application of OCT-M Technology and Application Comparison of Combined Catalysts Before and After Off-site Regeneration
OCT-M技术应用及组合催化剂器外再生后应用对比