1.
Development of Special Purpose NC Machine Tool Used forTube and Dynamic Characteristic Analysis of Parts of the Machine Tool;
薄壁长筒零件专用数控机床研制及机床部件动态性能分析
2.
Preparation Process of Thin-wall Cylinder Component Made from SiC Particles Reinforced Aluminum Matrix Functionally Graded Material by Centrifugal Casting Method
离心铸造SiC颗粒增强铝基梯度功能复合材料薄壁筒状零件制备工艺研究
3.
Measurement of Key Dimensions of Large-size and Thin-wall Pieces Based on Vision Inspection Technology;
大尺寸薄壁零件关键尺寸的视觉检测
4.
The Six-jaw Hydraulic Power Chuck and Clamping Thin-walled Components
六爪液压动力卡盘和薄壁零件的夹持
5.
Stability Prediction for High-speed Milling of Thin Walled Structures and Experimental Validation
薄壁零件高速铣削稳定性预测与验证
6.
Research on the Precise NC Milling Technology of Thin-walled Workpieces
薄壁零件精密数控铣削关键技术研究
7.
Research on Influencing Factors of Chatter in High Speed Milling of Thin-walled Workpiece
薄壁零件高速铣削振动影响因素研究
8.
Thin-Walled Part of Variable Wall Thickness Machining Modeling and Its Experimental Study
薄壁变壁厚零件切削加工建模及其实验研究
9.
The Study of Spinning Precision Control for Thin Wall Cylinder with Large Length-diameter Ratio
大长径比薄壁圆筒旋压精度控制工艺研究
10.
Design of Tool and Experimental Study with Respect to Ball Spinning Forming of Thin-walled Tubular Parts
薄壁筒形件滚珠旋压成形工装设计及实验研究
11.
Effect of Choker Clearance on Roundness of Thinwall Cylinder of Super Invar Steel
闷头间隙对超因瓦钢薄壁筒件圆度的影响
12.
The Research of Instrument for Measurement of Wall-thickness and Wall-thickness Difference of Thin-wall Parts of Variation Curvature Revolving Body;
变曲率回转体薄壁零件壁厚及壁厚差测量仪的研究
13.
Study on Precision Electroforming Technology of Complex Thin-walled Parts;
精密电铸法制造复杂薄壁零件的工艺研究
14.
Research on Analysing and Controlling Clamping Deformation of Precision Thin-wall Workpiece;
精密薄壁零件装夹变形的分析与控制研究
15.
The Research to Control the Heat-treatment Distortion of Shell-body;
薄壁壳体零件热处理变形控制工艺研究
16.
Research on Cutting Vibration and Machining Technology in Milling Thin-walled Components;
薄壁零件的加工振动分析与加工工艺研究
17.
Research on Deformation in End Milling of Aerospace Thin-walled Structure Part;
航空薄壁零件的铣削加工变形控制研究
18.
Die Design for Cylinder-shaped and Thin-walled Part;
薄壁尖角零件的成形过程及性能的数值模拟