1.
Three points of screws No. 1 in the vertical driving cam and the feed driving cam, and screw No. 2 in the main shaft thrust collar are nearly aligned.
上下送布凸轮、水平送布凸轮的第1 螺丝、上轴滑环的第2 螺丝的3 点基本对齐。
2.
Loosen two setscrews 5 in top feed cam 4.
拧松上送布凸轮4和固定螺丝52个螺丝。
3.
Turn the top feed cam until it reaches the position to allow the three components such as the throat plate surface, top end of needle eyelet and presser foot (pressing plane) to align, and fix the cam at that position.
在针板上面、针孔上端、中压脚(压脚面)的3点对齐的位置，转动上送布凸轮，然后固定。
4.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
5.
Loosen setscrews 2 in the vertical driving cam.
拧松上下传送凸轮的固定螺丝2。
6.
Design of Cam and Link Pusher Based on MATLAB and Pro/E
基于MATLAB和Pro/E凸轮连杆推送机构设计
7.
overhead cam shaft
上凸轮轴上部凸轮轴
8.
Research on Distributed CAD System Based on Web Technology for Cam Mechanism;
基于Web技术的分布式凸轮机构CAD系统的研究
9.
Software and Hardware Design on Distributing System During Cam Production
基于分布式系统的凸轮加工软硬件设计
10.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
11.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
12.
camshaft(journal )turning lathe
凸轮轴（轴颈）车床
13.
arm type cam roller mechanism
摇臂式凸轮滚轮机构
14.
cam shaft drive
凸轮轴传动凸轮轴传动装置
15.
STUDY ON PROFILE MODIFICATION OF ROLLER GEAR CAM MECHANISMS
弧面分度凸轮机构凸轮廓线修形研究
16.
Ferguson Cam Mechanism and the Design of Cam Surface
福开森凸轮机构及其凸轮轮廓曲面的设计
17.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
18.
Taper support rib usually two or three cam roller contacts, in order to edge into the axis of rotation to be sent to the uniform output shaft.
锥度支撑肋通常与两个或三个凸轮滚子接触，以便入力轴的旋转可均匀地传送到出力轴。