1.
Welded brass tube
GB/T11092-1989黄铜焊接管
2.
Microstructure and Mechanical Property of Welded Joints of Copper/Brass
紫铜/黄铜焊接接头微观组织及力学性能研究
3.
Technical specification for welding copper and copper alloys
铜及铜合金焊接及钎焊技术规程
4.
Copper phosphorus alloys. Useful for braze copper-copper or copper-brass, using flux.
以铜和磷为主要成份，用于铜-铜或铜-铜合金的焊接，需要使用助焊剂。
5.
A copper or brass fitting to which electrical wires can be soldered or otherwise connected.
焊片铜或黄铜配件，电线可与之焊上或接上
6.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比
7.
Thermal effects of gas tungsten arc welding for thick copper plates at different welding condition
不同焊接条件下TIG焊接紫铜厚板的热效应研究
8.
Torch-Brazing of T2 Copper with 1Cr17Ni2 Stainless Steel
T2紫铜与1Cr17Ni2不锈钢火焰钎焊焊接工艺技术研究
9.
Microstructure investigation for the interface of electric resistance welded Cu/Al thin walled tube
薄壁铜铝管电阻焊焊接界面的微观结构研究
10.
The specification for welding of copper and copper alloy clad steel plate
GB/T13147-1991铜与铜合金复合钢板焊接技术条件
11.
" Marine brass pipe flanges, braze-on"
GB/T2507-1989船用焊接铜法兰(四进位)
12.
Controlled laser beam welding used in restoration of thin-wall ancient bronzes;
可控激光束焊接薄壁青铜器工艺实验
13.
Hot-Wire TIG Cladding Copper on Steel and the Microstructure Analysis of the Joint
铜/钢热丝TIG堆焊工艺及接头组织分析
14.
Welding Process of H69 Copper-plate and 6063 Aluminium-plate
H69铜板与6063铝板的焊接工艺
15.
TIG welding for austenitic stainless steel tube plate and copper pipe
紫铜换热管与不锈钢管板接头的TIG焊
16.
Laser Welding on Dissimilar Metals of Brass/Copper and Brass/Low-Carbon-Steel;
黄铜与紫铜及黄铜与低碳钢异种金属的激光焊接
17.
Microstructure and Mechanical Properties of QAl9-1 and 12Ni2CrMoV Joints Welded by TIG Technology
QAl9-1铝青铜与12Ni2CrMoV钢TIG焊接接头组织及性能研究
18.
Valve body shall have solder ends and 3-pc. design permitting disassembly for brazing installation.
阀体应该是焊接连接,三件式结构,便于铜焊安装时的拆卸。