1.
idle roller conveyor
无驱动力辊筒运输机
2.
Structure Parameter Design for Gravity Brake-rollers;
重力式辊筒输送机制动辊的结构参数设计
3.
gravity roller carrier
重力运输机, 辊子输送器
4.
Traction Distribution for Two-drum-driven Conveyor Belt
双滚筒驱动带式输送机牵引力分配研究
5.
Determine of Automatic Straining Force of Belt Conveyor with Two Independent Connected Drive Drums under Starting Station
双滚筒独立驱动带式输送机起动自动拉紧力调定
6.
Parameters' Calculation on Conveyer with Adhesive Tape by Multi-rollers Driving
多滚筒驱动胶带输送机的驱动参数计算
7.
The Limitation of Driving a Zonal Transport Machine by Using Double Rollers Together;
带式输送机双滚筒共同驱动的局限性
8.
The Arrangement Analysis of Belt Conveyer Driving by Single Drum
带式输送机单滚筒驱动装置布置分析
9.
Direct drive to the rolls with heavy-duty helical bevel gears where the output shaft is directly coupled to the roll shaft.
高坚固的螺旋斜线轴承直接驱动辊筒。输出轴直接连接辊轴，中间没有任何传动消耗。
10.
The Research on Virtual Prototype of Belt Conveyor with Twin Driving Respective Drums;
双滚筒分别驱动带式输送机虚拟样机研究
11.
The Calculation of Gravature Printing Pressure and Cylinder Driving Power;
凹版印刷机压力及滚筒驱动功率计算
12.
The main products of this corporation are rollers, motorized pulleys and components for bulk handling.
经营范围为生产、销售托辊、电动滚筒和皮带输送机的配套产品。
13.
The Finite Element Analysis and CAD Design for the Drums of the Good-Sized Conueyor Belts;
大型带式输送机驱动滚筒的有限元分析及CAI
14.
Selection of Driven Type and Motor of Roller Table in Hot Rolling Mill
热轧厂运输辊道传动及电机选型的研究与应用
15.
Force Analysis and Improvement of Oil-cylinder Driving Construction of Aluminium Bronze Transporter;
铝锭冷却运输机油缸驱动机构的受力分析及改进
16.
central cylinder
印花大锡林（辊筒印花机的承压大辊筒）
17.
"On the recoiler, there is a pressing roll, which position is controlled by a cylinder. "
卷取机上设有压辊,压辊升降由油缸驱动
18.
The platform is divided into three driving segments, adopting three speed-stepless motors to drive roller via wheel gear.
调速输坯台分3段传动，采用3台无级变速电机通过齿轮带动辊棒。