1.
Pressure Testing Radiator Pressure Cap—Typical
压力测试散热器压力盖—典型的
2.
Incorrect/improperly operating pressure cap.
压力盖工作不正确/不正常。
3.
Replace cap with the correct rating for the system.
按系统正确的额定值更换压力盖。
4.
COOLANT LOSS TO THE GROUND WITHOUT PRESSURE CAP BLOWOFGAUGE READING HIGH OR HOT
没有压力盖喷出装置冷却剂流失到地面。表的读数高或热。
5.
They press hard enough against the lid of the pan to lift it up.
它们的压力之大足以把锅盖顶起。
6.
Set the machine pressure at such that ink covers the fibers well.
设置机器压力使油墨能充分覆盖布料。
7.
Analysis of the Pressure on Extending the Coverage of Social Security;
浅析社会保障覆盖面扩大面临的压力
8.
Equally distributed gland bolts provide uniform compression of packing.
均匀分布的压盖螺栓为填料提供均匀的压力。
9.
Study on Structural Techniques of the Sealing Plate;
热水器压力罐不锈钢压盖的结构工艺性研究
10.
Gland: Gland is a two-piece ball-type which exerts even pressure on the packing without binding the stem.
压盖：压盖为两件式球形结构，将压力均匀地施加在填料上，不会造成阀杆弯曲。
11.
Gland: Gland is a two-piece, ball-type which exerts even pressure on the packing without binding the stem.
压盖：压盖是两件式球形结构，将压力均匀地施加在填料上，不会造成阀杆弯曲。
12.
A threaded-on, pressure/vent cap mounted to the coolant tank
安装在冷却剂箱上的螺纹固定的压力/排气盖
13.
The Measurement of Detonation Pressure in Industrial Explosives with Sulphur-cap Electrical Probe
用硫磺盖帽电探针测定工业炸药爆轰压力
14.
Study on Variable Binder Holder Force (VBHF) during Automobile Panel Draw Process;
汽车覆盖件拉深过程中变压边力的研究
15.
Complex casting of magnesium alloy on pressure solidification with lost foam casting process
镁合金复杂缸盖零件消失模铸造压力凝固工艺
16.
To imprint(a design) by pressure with an instrument on a superimposed pattern.
压印通过一仪器用压力将（一图案）印在覆盖在上面的模子上
17.
A surgical procedure used to relieve pressure on an organ or part, such as the abdomen, cranium, or spinal cord.
减压、解压外科手术过程中解除一器官或身体的一部分的压力，如腹部，头盖骨或脊髓
18.
Turn the cap only to the first stop to permit any pressure in the system to be released through the overflow tube. Then turn the cap further to remove it
稍微转动一下水箱盖,使系统内的压力通过溢流管释放掉,然后继续转动水箱盖直至卸掉